Cura Infill Setting for Stronger 3D Prints using Less Plastic
Chuck shows you a setting in Cura that gives you Stronger 3D Prints using Less Plastic. Who would have thought a setting in the infill section could work so well?
He shows you how to use it and compares it to a higher infill print to see how much plastic it saves and how the relative strength compares in a simple test in this week's Filament Friday.
***** Support the Channel ******************
Financial Support through Patreon:
https://www.patreon.com/elproducts
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
http://bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends:
https://bit.ly/3yuyuze
*********************************************
Buy Voxelab Aquila:
Amazon: https://amzn.to/3xPNCId
Voxelab: https://bit.ly/3zcu6X3
****** Creality Ender 3 V2 *******
Amazon: https://amzn.to/3ioLVsC
Banggood: https://bit.ly/2MQ5VGM
Creality: https://bit.ly/2ZdKllU
********* Ender 3X / Pro 3X 8-Bit Silent Driver Board ****************
Ender 3X: https://bit.ly/2P9O6qX
Ender 3X Pro: https://bit.ly/3cnnpI0
****** Creality Ender 3: *******
https://amzn.to/3fSIISy
From Banggood : https://bit.ly/2wfD5Ia
From Gearbest : https://bit.ly/2re9iQe
Direct from Creality: https://bit.ly/2sEthbX
Bundle From MatterHackers: https://bit.ly/2ZvGLnE
****** Creality Ender 3 Pro: ******
https://amzn.to/2QUjRUL
From Banggood.com: https://bit.ly/2DBG0AI
Direct from Creality: https://bit.ly/2SIMa86
Bundle From MatterHackers: https://bit.ly/2FuKFpu
CHEP CUBE: https://www.thingiverse.com/thing:3189377
CHEP PAWN: https://www.thingiverse.com/thing:997832
CR-10 V2
Amazon: https://amzn.to/2C2naiy
Creality: https://bit.ly/2WwT8gz
Banggood: https://www.banggood.com/custlink/G3GK60pMhe
Gearbest: https://bit.ly/327t4d9
******** Silent Driver Boards ****************
Creality 8-bit V1.1.5 Silent Stepper Board:
https://amzn.to/2YPM0Nh
Creality V4.2.7 32-bit Silent Stepper Board:
Amazon: https://amzn.to/34GhY31
Creality Official Store: https://bit.ly/320ZzMS
Banggood: https://bit.ly/3ebPSzP
SKR Mini E3 32-Bit Silent Driver Board V2.0 :
Amazon: https://amzn.to/2XDY9Wi
Banggood: https://www.banggood.com/custlink/KDmdJc74It
***** Ender 3 Glass Bed *****
Amazon: https://amzn.to/3tYea7m
Banggood: https://bit.ly/3lSDVTH
Creality: https://bit.ly/3rqR9bx
Creality Official Firmware:
https://www.creality.com/download
Nozzle Removal Tool:
Palm Ratchet: https://amzn.to/2YpNtJX
1/4'' Socket: https://amzn.to/2OjdHdg
Creality Ender 3 Parts/Upgrades
-------------------------------------------
X-Axis Tensioner
https://amzn.to/38BKbYP
Y-Axis Tensioner
https://amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
https://bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: https://amzn.to/2YPM0Nh
Cap Tubes & Couplings: https://amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: https://amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: https://amzn.to/3sfDG7s
Solder Sleeve Kit: https://amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): https://amzn.to/38u9aOl
CR-10 Fan Set (12v): https://amzn.to/2PrcCxK
T-Nuts Kit: https://amzn.to/2LsQZg8
Screw Kit: https://amzn.to/2Va8uGK
Temperature Meter Used in Videos: https://amzn.to/2JpUJOC
Screwdriver set used in Videos: https://amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): https://bit.ly/2MNvmcs
Cura Slicer Profiles:
https://www.chepclub.com/cura-profiles.html
Cura Download:
https://ultimaker.com/software/ultimaker-cura
CHEP Prusa Profiles:
https://www.chepclub.com/prusaslicer-profiles.html
CR-10:
https://amzn.to/2JDO9oP
From Creality: https://bit.ly/2PF01uW
From Banggood : https://bit.ly/2udpwaj
From GearBest.com : https://bit.ly/2pLZpow
***** Support the Channel ******************
EBAY USA: http://ebay.to/1wtxfiU
EBAY UK: http://ebay.eu/2qdC5iy
EBAY Canada: http://bit.ly/2qdGRwh
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
http://bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends:
https://bit.ly/3yuyuze
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
https://amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
**************** Free Filament Friday Sticker ***************
Send Self Addressed Stamped Envelope to:
Electronic Products
P.O.Box 251
Milford, MI 48381
**********************************************************
Видео Cura Infill Setting for Stronger 3D Prints using Less Plastic канала CHEP
He shows you how to use it and compares it to a higher infill print to see how much plastic it saves and how the relative strength compares in a simple test in this week's Filament Friday.
***** Support the Channel ******************
Financial Support through Patreon:
https://www.patreon.com/elproducts
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
http://bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends:
https://bit.ly/3yuyuze
*********************************************
Buy Voxelab Aquila:
Amazon: https://amzn.to/3xPNCId
Voxelab: https://bit.ly/3zcu6X3
****** Creality Ender 3 V2 *******
Amazon: https://amzn.to/3ioLVsC
Banggood: https://bit.ly/2MQ5VGM
Creality: https://bit.ly/2ZdKllU
********* Ender 3X / Pro 3X 8-Bit Silent Driver Board ****************
Ender 3X: https://bit.ly/2P9O6qX
Ender 3X Pro: https://bit.ly/3cnnpI0
****** Creality Ender 3: *******
https://amzn.to/3fSIISy
From Banggood : https://bit.ly/2wfD5Ia
From Gearbest : https://bit.ly/2re9iQe
Direct from Creality: https://bit.ly/2sEthbX
Bundle From MatterHackers: https://bit.ly/2ZvGLnE
****** Creality Ender 3 Pro: ******
https://amzn.to/2QUjRUL
From Banggood.com: https://bit.ly/2DBG0AI
Direct from Creality: https://bit.ly/2SIMa86
Bundle From MatterHackers: https://bit.ly/2FuKFpu
CHEP CUBE: https://www.thingiverse.com/thing:3189377
CHEP PAWN: https://www.thingiverse.com/thing:997832
CR-10 V2
Amazon: https://amzn.to/2C2naiy
Creality: https://bit.ly/2WwT8gz
Banggood: https://www.banggood.com/custlink/G3GK60pMhe
Gearbest: https://bit.ly/327t4d9
******** Silent Driver Boards ****************
Creality 8-bit V1.1.5 Silent Stepper Board:
https://amzn.to/2YPM0Nh
Creality V4.2.7 32-bit Silent Stepper Board:
Amazon: https://amzn.to/34GhY31
Creality Official Store: https://bit.ly/320ZzMS
Banggood: https://bit.ly/3ebPSzP
SKR Mini E3 32-Bit Silent Driver Board V2.0 :
Amazon: https://amzn.to/2XDY9Wi
Banggood: https://www.banggood.com/custlink/KDmdJc74It
***** Ender 3 Glass Bed *****
Amazon: https://amzn.to/3tYea7m
Banggood: https://bit.ly/3lSDVTH
Creality: https://bit.ly/3rqR9bx
Creality Official Firmware:
https://www.creality.com/download
Nozzle Removal Tool:
Palm Ratchet: https://amzn.to/2YpNtJX
1/4'' Socket: https://amzn.to/2OjdHdg
Creality Ender 3 Parts/Upgrades
-------------------------------------------
X-Axis Tensioner
https://amzn.to/38BKbYP
Y-Axis Tensioner
https://amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
https://bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: https://amzn.to/2YPM0Nh
Cap Tubes & Couplings: https://amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: https://amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: https://amzn.to/3sfDG7s
Solder Sleeve Kit: https://amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): https://amzn.to/38u9aOl
CR-10 Fan Set (12v): https://amzn.to/2PrcCxK
T-Nuts Kit: https://amzn.to/2LsQZg8
Screw Kit: https://amzn.to/2Va8uGK
Temperature Meter Used in Videos: https://amzn.to/2JpUJOC
Screwdriver set used in Videos: https://amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): https://bit.ly/2MNvmcs
Cura Slicer Profiles:
https://www.chepclub.com/cura-profiles.html
Cura Download:
https://ultimaker.com/software/ultimaker-cura
CHEP Prusa Profiles:
https://www.chepclub.com/prusaslicer-profiles.html
CR-10:
https://amzn.to/2JDO9oP
From Creality: https://bit.ly/2PF01uW
From Banggood : https://bit.ly/2udpwaj
From GearBest.com : https://bit.ly/2pLZpow
***** Support the Channel ******************
EBAY USA: http://ebay.to/1wtxfiU
EBAY UK: http://ebay.eu/2qdC5iy
EBAY Canada: http://bit.ly/2qdGRwh
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
http://bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends:
https://bit.ly/3yuyuze
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
https://amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
**************** Free Filament Friday Sticker ***************
Send Self Addressed Stamped Envelope to:
Electronic Products
P.O.Box 251
Milford, MI 48381
**********************************************************
Видео Cura Infill Setting for Stronger 3D Prints using Less Plastic канала CHEP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![One Click Smoother 3D Prints Using Ironing In Cura](https://i.ytimg.com/vi/HMqch_L58do/default.jpg)
![Cura V4.10 + NEW! CHEP Slicing Profiles](https://i.ytimg.com/vi/X9Nu4jjAkhs/default.jpg)
![3D Printing Myths I used to believe...](https://i.ytimg.com/vi/oX4up29xUuw/default.jpg)
![Can you 3D Print with Trimmer Line?!](https://i.ytimg.com/vi/XsrkFIuQEZM/default.jpg)
![Cura Slicer V4.9 plus Cura Arachne Engine Sneak Peek](https://i.ytimg.com/vi/D39rIi8zKfk/default.jpg)
![Ender 3 V2 Auto Bed Level](https://i.ytimg.com/vi/TroPjdkSEOY/default.jpg)
![Gradient Infill - NEW efficient infill for 3D prints!](https://i.ytimg.com/vi/hq53gsYREHU/default.jpg)
![](https://i.ytimg.com/vi/VzdkYnKSCQg/default.jpg)
![Extrusion Width - The magic parameter for strong 3D prints?](https://i.ytimg.com/vi/9YaJ0wSKKHA/default.jpg)
![12 3D printed tools you need for your workshop](https://i.ytimg.com/vi/tO5Ym6-H2Ac/default.jpg)
![Ender 3 Upgrade - Pivoting Side Spool Holder](https://i.ytimg.com/vi/Jp7mRxM1Az8/default.jpg)
![CURA - Tree Supports vs Standard Supports](https://i.ytimg.com/vi/7BURpQNXrDA/default.jpg)
![Voxelab Aquila the $179 Ender 3 V2 Clone](https://i.ytimg.com/vi/bgY8vwv3gQA/default.jpg)
![Calibrate Perfect Retraction Settings Using a Cura 4.8 Plug-in](https://i.ytimg.com/vi/6LjbCIGCmd0/default.jpg)
![INFILL pattern and SHELLS - How to get the maximum STRENGTH out of your 3D prints?](https://i.ytimg.com/vi/AmEaNAwFSfI/default.jpg)
![$169 Elegoo Neptune 2 - Amazing Print Quality](https://i.ytimg.com/vi/PgiS-56tq-w/default.jpg)
![3 Cura Slicer Setting Tricks For Beginners](https://i.ytimg.com/vi/su_m5zV9rvA/default.jpg)
![Quick Fix to Eliminate Stringing on your 3D Prints](https://i.ytimg.com/vi/OG7We83M5gc/default.jpg)
![TESTING 3D printed INFILL PATTERNS for their STRENGTH](https://i.ytimg.com/vi/upELI0HmzHc/default.jpg)
![Using Adaptive Layers For Faster 3d Printing](https://i.ytimg.com/vi/_ZO08frWzYg/default.jpg)