3 Cura Slicer Setting Tricks For Beginners

Chuck shows you three Cura Slicer Setting Tricks For Beginners that he uses on his Creality Ender 3 and CR-10 Mini's all the time. These Cura 3.x tricks are especially helpful to anyone getting started with 3D Printing and also may help experienced users who may need separate processes in Cura. He goes thru each step by step so you can recreate these tricks yourself.

Cura 3.x : https://bit.ly/2rqtnT5
Support Test Print: https://www.thingiverse.com/thing:3043840
Marvin: https://www.thingiverse.com/thing:215703
HotEnd Prop: https://www.thingiverse.com/thing:3348742

Filament Friday Tool Kit: https://amzn.to/2MOR00X
Filament Friday 3D Printer Starter Kits: https://bit.ly/2EuojUq
Filament Friday Filament: https://amzn.to/2rgz3Ma

Temperature Meter Used in Videos: https://amzn.to/2JpUJOC
Screwdriver set used in Videos: https://amzn.to/2PbWocM

Creality Ender 3/CR-10 Parts:
———————————
PTFE Coupling: https://amzn.to/2BJDog1
Capricorn Tubing: https://amzn.to/2nI2ipS
CR10/Ender3 Silicon Heater Block Cover: https://amzn.to/2PaxJ89
CR10/Creality Ender 3 Nozzles: https://amzn.to/2JF3Ii8
Solder Sleeve Kit: https://amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): https://amzn.to/38u9aOl
CR-10 Fan Set (12v): https://amzn.to/2PrcCxK
T-Nuts Kit: https://amzn.to/2LsQZg8
Screw Kit: https://amzn.to/2Va8uGK

Creality Ender 3:
From Banggood : https://bit.ly/2wfD5Ia
From : : https://amzn.to/2VoA4zV
From Gearbest : https://bit.ly/2re9iQe

Creality Ender 3 Pro:
From Banggood.com: https://bit.ly/2DBG0AI
From .com: https://amzn.to/2QUjRUL

Geeetech A10:
From Banggood: https://bit.ly/2PfgC8u
From : https://amzn.to/2SsVzxD
From Gearbest: https://bit.ly/2Cs6nHi

CR10 Mini
From Banggood : https://bit.ly/2u5XNJk
From .com : https://amzn.to/2l8B7mX
From Gearbest : https://bit.ly/2LovNYL

CR-10:
From Banggood : https://bit.ly/2udpwaj
From : https://amzn.to/2s899uZ
From GearBest.com : https://bit.ly/2pLZpow

CR-10S
From Banggood : https://bit.ly/2jQgZVY
From : https://amzn.to/2Rqv7aN

Buy a Prusa 3D MK2 or MK3 : https://bit.ly/2M88JjJ

SeeMeCNC Artemis: http://bit.ly/2OxRNnU

Geeetech A20:
: https://amzn.to/2s8p6B7

A10M
Gearbest: https://bit.ly/2DJI09w
: https://amzn.to/2FqK2Nj

A20M
Banggood: https://bit.ly/2PyKwpd
Gearbest: https://bit.ly/2K940Lp
: https://amzn.to/2DJahNg
***** Support the Channel ******************
EBAY USA: http://ebay.to/1wtxfiU
EBAY UK: http://ebay.eu/2qdC5iy
EBAY Canada: http://bit.ly/2qdGRwh
Banggood:
https://www.banggood.com/custlink/vDGGyVVbB8
Gearbest:
https://www.gearbest.com?lkid=19506489

Support the Channel here and shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
http://bit.ly/1Ugcijp

Note:
As an Amazon Associate, I earn from qualifying purchases.

Financial Support through Patreon:
https://www.patreon.com/elproducts
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************

Filament Friday Playlist:
https://goo.gl/yJLNhr

Chuck's Arduino Book:
http://bit.ly/29QTbec

Chuck's Website:
http://www.elproducts.com

Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

Видео 3 Cura Slicer Setting Tricks For Beginners канала CHEP