5 beginner Ender 3 fixes - featuring manual mesh bed leveling guide

3D printing is a rewarding hobby but it can present challenges for beginners. I guide you through fixes for five of the most common issues noobs face. Extruder/hot end clogs, loose carriages, wobbly frame, bed leveling are all covered, as well as manual mesh bed leveling, which emulates a BLtouch without actually needing one. This means the upgrade is free!

I’ve tried to pack a lot into 15 minutes, hopefully this is a comprehensive but concise guide. All resources are below, but the take home message should be to persevere and frequent community groups to learn as much as possible. Search before you post, if you do post be clear and provide images/video, and most importantly, be very grateful when helped!

Purchase the Ender 3 from these links:
Ender 3 Pro Banggood ($30 off with coupon 1d1c08): http://bit.ly/2OUcEyS
Ender 3 Banggood (US warehouse, Coupon: f2bf59): http://bit.ly/2Efoi6B
Ender 3 Pro Amazon: https://amzn.to/2DpkbEs
Ender 3 Amazon: https://amzn.to/2xyJ23s
Ender 3X (glass bed version): https://amzn.to/2I7dG85

Official Creality 3D User Group: https://www.facebook.com/groups/1700252256935330/
Please look for the latest Ender 3 Troubleshooting Guide by Luke Hatfield in the files section.
Pressure fitting fix for bowden tube: https://www.thingiverse.com/thing:2994683/

First layer Ultimaker reference: https://ultimaker.com/en/resources/21330-what-does-a-successful-first-layer-look-like
My ‘x’ STL has previously been posted for my Patrons. An alternative design is here: https://www.thingiverse.com/thing:2899815
Resize to fit bed and only one layer thick, in my case 0.2mm.

*Manual Mesh Bed Leveling Firmware Instructions*
Please follow my burning a bootloader guide: https://www.youtube.com/watch?v=fIl5X2ffdyo
Then flash vanilla Marlin as shown here: https://www.youtube.com/watch?v=N7JLchsFRDU
Now you are ready to change in configuration.h:
1. Uncomment #define probe_manually
2. Uncomment #define LCD_bed_levelling
3. Uncomment #define mesh_bed_leveling
In configuration_adv.h:
4. Comment out #define arc_support
5. Set board to Sanguino, 1284P 16mhz
6. Set port and upload

Marlin mesh bed leveling reference: https://github.com/MarlinFirmware/Marlin/wiki/Manual-Mesh-Bed-Leveling
G29 reference: http://marlinfw.org/docs/gcode/G029-mbl.html
M420 reference: http://marlinfw.org/docs/gcode/M420.html

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Gearbest affiliate link (help support the channel): https://www.gearbest.com/?lkid=13807527

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

#3dprinting #ender3 #problems

Видео 5 beginner Ender 3 fixes - featuring manual mesh bed leveling guide канала Teaching Tech