Ep 24 - Make a Modern Multi-Scale Electro Acoustic Guitar - Custom Bridge & Pickup Cavities, Oh My!
Welcome to Crimson Guitars https://www.youtube.com/user/CrimsonCustomGuitars?sub_confirmation=1 and Ben’s home workshop where he is building the modern multi-scale NEBULA 2.0 Guitar. In this 'BEN-ultimate' episode, Ben is so close to the finish line, but he decides not to rush and make mistakes. He makes a custom Bridge and painstakingly cuts through the perfect galactic finish to make the custom pickup cavity.
In this series, Ben will be building the new and improved Nebula 2.0 as a custom order. https://youtube.com/playlist?list=PLp6z5fUMeeAbybji0M7hS0Xde3YckYxyh
Different from the original, this guitar will be a multi-laminate neck, modern fanned fret, semi-hollow, electro-acoustic beauty.
This future owner of this guitar: The Gear Garage - https://www.thegeargarage.co.uk/
Chapters:
0:00 Introduction
1.15 Finishing up the finer details - the logo and sanding/attaching the nut - with shellac!
and all that jazz!
3:16 Bridge
4:20 Exciting pick-up - Mini Humbucker and Multi-Scale Version -
email: crimsonguitars.com if you want one!
4:46 Shall we cut a hole? Nerve-racking! Measure, measure, measure - draw, measure
6:25 Definitely no router - by hand all the way.
8:42 Starting with small Crimson fret slot cleaning saw, then the micro saw
13:42 Small lacquer chip re-attached with a dab of superglue.
15:51 Preparation for installing the pick-up
16:28 Now to the bridge - pretty flamed maple
and all that jazz!
22:54 Fire?? or Stain?? Burn it of course! heh-heh
25:23 So - inside pick-up, cut down the saddle, install the pick-up, the wiring, jack,
and strap buttons. Still to be done - so - another episode!
27:00 Conclusion
If you haven’t subscribed yet we would LOVE it if you would: https://bit.ly/2VAluun
If you fancy any of the quality vintage tools that Ben favours check out The Vintage Tool Shop, with over 8000 vintage and used planes, chisels, and assorted hand tools listed for your delight and temptation. https://vintagetoolshop.com/
Why not join our Discord server for guitar building discussion and a great and vibrant community https://discord.gg/N82ZFTzAJ6
We would love it if you would join this channel membership to get
access to perks: https://bit.ly/3yOlJju and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link https://luthiersquestiontime.buzzsprout.com/
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible:
Triton Tools - http://www.tritontools.com/en-GB all the power tools a maker could want!
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro Protect your hearing while entertaining yourself at work – win-win!
Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or for US viewers $10 off at "isotunes.com"
Wagner Meters - https://www.wagnermeters.com/ - the best moisture meters available.
Starbond Adhesives - https://www.starbond.com/?rfsn=4953733.fb5f31 Get the Freshest CA glues in the market (USA orders) at www.starbond.com Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 or buy through our luthiers' store http://bit.ly/LuthTools
Leatherman - https://www.leatherman.co.uk/ The multi-tool of multi-tools!
Ben's Vintage Tool Shop - https://vintagetoolshop.com/ quality used and vintage tools for all
Workshop Heaven - https://www.workshopheaven.com/ the finest woodworking tools
Music used in this video from Epidemic Sound - https://www.epidemicsound.com/referral/31qosr/
______________________________________________________________________
Please visit us at http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
and follow our socials for sneak peeks and special offers
Instagram - https://www.instagram.com/crimsonguitars/
Ben’s personal Instagram - https://www.instagram.com/therealbencrowe/
Facebook - https://www.facebook.com/CrimsonCustomGuitars/
Patreon - https://www.patreon.com/crimsonguitars
____________________________________________________________________
Thank you again for all your support, we really, really appreciate it! – Ben
Stay tuned, stay awesome and above all – go make a GUITAR! ______________________________________________________________________
Видео Ep 24 - Make a Modern Multi-Scale Electro Acoustic Guitar - Custom Bridge & Pickup Cavities, Oh My! канала Crimson Custom Guitars
In this series, Ben will be building the new and improved Nebula 2.0 as a custom order. https://youtube.com/playlist?list=PLp6z5fUMeeAbybji0M7hS0Xde3YckYxyh
Different from the original, this guitar will be a multi-laminate neck, modern fanned fret, semi-hollow, electro-acoustic beauty.
This future owner of this guitar: The Gear Garage - https://www.thegeargarage.co.uk/
Chapters:
0:00 Introduction
1.15 Finishing up the finer details - the logo and sanding/attaching the nut - with shellac!
and all that jazz!
3:16 Bridge
4:20 Exciting pick-up - Mini Humbucker and Multi-Scale Version -
email: crimsonguitars.com if you want one!
4:46 Shall we cut a hole? Nerve-racking! Measure, measure, measure - draw, measure
6:25 Definitely no router - by hand all the way.
8:42 Starting with small Crimson fret slot cleaning saw, then the micro saw
13:42 Small lacquer chip re-attached with a dab of superglue.
15:51 Preparation for installing the pick-up
16:28 Now to the bridge - pretty flamed maple
and all that jazz!
22:54 Fire?? or Stain?? Burn it of course! heh-heh
25:23 So - inside pick-up, cut down the saddle, install the pick-up, the wiring, jack,
and strap buttons. Still to be done - so - another episode!
27:00 Conclusion
If you haven’t subscribed yet we would LOVE it if you would: https://bit.ly/2VAluun
If you fancy any of the quality vintage tools that Ben favours check out The Vintage Tool Shop, with over 8000 vintage and used planes, chisels, and assorted hand tools listed for your delight and temptation. https://vintagetoolshop.com/
Why not join our Discord server for guitar building discussion and a great and vibrant community https://discord.gg/N82ZFTzAJ6
We would love it if you would join this channel membership to get
access to perks: https://bit.ly/3yOlJju and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link https://luthiersquestiontime.buzzsprout.com/
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible:
Triton Tools - http://www.tritontools.com/en-GB all the power tools a maker could want!
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro Protect your hearing while entertaining yourself at work – win-win!
Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or for US viewers $10 off at "isotunes.com"
Wagner Meters - https://www.wagnermeters.com/ - the best moisture meters available.
Starbond Adhesives - https://www.starbond.com/?rfsn=4953733.fb5f31 Get the Freshest CA glues in the market (USA orders) at www.starbond.com Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 or buy through our luthiers' store http://bit.ly/LuthTools
Leatherman - https://www.leatherman.co.uk/ The multi-tool of multi-tools!
Ben's Vintage Tool Shop - https://vintagetoolshop.com/ quality used and vintage tools for all
Workshop Heaven - https://www.workshopheaven.com/ the finest woodworking tools
Music used in this video from Epidemic Sound - https://www.epidemicsound.com/referral/31qosr/
______________________________________________________________________
Please visit us at http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
and follow our socials for sneak peeks and special offers
Instagram - https://www.instagram.com/crimsonguitars/
Ben’s personal Instagram - https://www.instagram.com/therealbencrowe/
Facebook - https://www.facebook.com/CrimsonCustomGuitars/
Patreon - https://www.patreon.com/crimsonguitars
____________________________________________________________________
Thank you again for all your support, we really, really appreciate it! – Ben
Stay tuned, stay awesome and above all – go make a GUITAR! ______________________________________________________________________
Видео Ep 24 - Make a Modern Multi-Scale Electro Acoustic Guitar - Custom Bridge & Pickup Cavities, Oh My! канала Crimson Custom Guitars
Показать
Комментарии отсутствуют
Информация о видео
11 сентября 2021 г. 15:00:37
00:29:14
Другие видео канала
![Ep 25 - Make a Modern Multi-Scale Electro Acoustic Guitar - We LIED! No more Promises!](https://i.ytimg.com/vi/Uu19eeroc-0/default.jpg)
![Open G | Why EVERYONE Should Know It.](https://i.ytimg.com/vi/WRAK3WBSKWw/default.jpg)
![Bourgeois Guitars Review](https://i.ytimg.com/vi/rtyrC4gXdaU/default.jpg)
![How to make a Guitar Case // Woodworking | I Like To Make Stuff](https://i.ytimg.com/vi/b0_kn3ds-J4/default.jpg)
![The BBC BROKE my Custom Guitar! So let's fix it then!](https://i.ytimg.com/vi/sZwXh_SZyko/default.jpg)
![](https://i.ytimg.com/vi/UnrDqJoBBew/default.jpg)
!["The Guitar Maker" (Jeffrey Yong Guitars) - Shun Ng's Beyond The Strings: Episode 1](https://i.ytimg.com/vi/PXajfrymTQ4/default.jpg)
![How to make a simple DIY box guitar](https://i.ytimg.com/vi/uJt4_iMAWKE/default.jpg)
![Are There Good Acoustic Guitars Under $500?](https://i.ytimg.com/vi/G_WYAhnO5V4/default.jpg)
![Ep 15 - Shred - The Finale - How to Build a Copper Leaf Multi-Scale Kit Guitar](https://i.ytimg.com/vi/9oq2DZ_pqGs/default.jpg)
![Ep 26 - A Modern Multi-Scale Acoustic Guitar LIVES! - FINAL episode of the Nebula 2.0 Guitar Build](https://i.ytimg.com/vi/g7kwuGanKAk/default.jpg)
![Shou Sugi Ban - Guitar finishing step-by-step](https://i.ytimg.com/vi/nc_sFp4VPVg/default.jpg)
![Ben gets his hands on a Legendary 1959 Gibson Les Paul Standard - Guitars that made History](https://i.ytimg.com/vi/T23EyQr3zRE/default.jpg)
![Is your Guitar too HEAVY? Take a DRILL to it!! Weight Relief Insanity!!!](https://i.ytimg.com/vi/okUFy1ssy0c/default.jpg)
![My Daughter HATES a guitar I made for her! EXTREME Mac Pro Style weight relief on a 10lb+ guitar!](https://i.ytimg.com/vi/tCCEN-04WLk/default.jpg)
![Star Wars Inspired Scratch Guitar Build | Day 1: From Design to Making a Neck.](https://i.ytimg.com/vi/sbQaBNMNGuU/default.jpg)
![Road Trip | Piano Restoration Workshop Tour & MORE](https://i.ytimg.com/vi/tWaUCZS1cHw/default.jpg)
![Ep 3.5 My Daughter HATES a guitar I made for her! Custom Dome Nut Control Knobs](https://i.ytimg.com/vi/Ggn8x6C9HvI/default.jpg)
![FINAL Day of ONE Day Star Wars Guitar Build | Days 9 & 10](https://i.ytimg.com/vi/nMaTZT5tX0I/default.jpg)
![Ep. 1 - Hand Tool Only Build - Acoustic Travel Guitar from a 4x4 FENCE POST - Design/Materials](https://i.ytimg.com/vi/4FMSCfN3fV8/default.jpg)