How to make a Guitar Case // Woodworking | I Like To Make Stuff
Check out how I made a custom guitar case (it's super easy)!
SPONSORED by Audible - http://audible.com/makestuff
As I was packing up my house, office and shop to move, I realized that my Fender Stratocaster guitar didn't have a hard case. Replacement cases are pretty cheap, but since I'm me, I decided to make my own.
A lot of lightweight cases are made from cardboard, so this one (made out of plywood) is a bit stronger, although it's still not meant to be a flight case. I tacked together the plywood and wrapped the entire thing in orange Tolex. The inside is made from upholstery foam covered in velvet to keep the guitar secure on the inside without worrying of scratching it. To protect the outside, I added all black hardware (corner protectors, latches, handle, hinges).
The project is very easy (although a little messy due to the amount of spray adhesive) and anyone can pull it off with minimal tools.
TOOLS & SUPPLIES:
https://kit.co/iliketomakestuff/guitar-case-project
https://kit.co/iliketomakestuff/my-woodworking-tools
https://kit.co/iliketomakestuff/shop-safety-gear
Subscribe: http://bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
https://iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
http://www.iliketomakestuff.com/patreon
FOLLOW:
http://instagram.com/iliketomakestuff
http://twitter.com/iliketomakestuff
http://facebook.com/iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
How to make a Guitar Case // Woodworking | I Like To Make Stuff
https://www.youtube.com/watch?v=b0_kn3ds-J4
I Like To Make Stuff
http://www.youtube.com/Iliketomakestuff
Видео How to make a Guitar Case // Woodworking | I Like To Make Stuff канала I Like To Make Stuff
SPONSORED by Audible - http://audible.com/makestuff
As I was packing up my house, office and shop to move, I realized that my Fender Stratocaster guitar didn't have a hard case. Replacement cases are pretty cheap, but since I'm me, I decided to make my own.
A lot of lightweight cases are made from cardboard, so this one (made out of plywood) is a bit stronger, although it's still not meant to be a flight case. I tacked together the plywood and wrapped the entire thing in orange Tolex. The inside is made from upholstery foam covered in velvet to keep the guitar secure on the inside without worrying of scratching it. To protect the outside, I added all black hardware (corner protectors, latches, handle, hinges).
The project is very easy (although a little messy due to the amount of spray adhesive) and anyone can pull it off with minimal tools.
TOOLS & SUPPLIES:
https://kit.co/iliketomakestuff/guitar-case-project
https://kit.co/iliketomakestuff/my-woodworking-tools
https://kit.co/iliketomakestuff/shop-safety-gear
Subscribe: http://bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
https://iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
http://www.iliketomakestuff.com/patreon
FOLLOW:
http://instagram.com/iliketomakestuff
http://twitter.com/iliketomakestuff
http://facebook.com/iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
How to make a Guitar Case // Woodworking | I Like To Make Stuff
https://www.youtube.com/watch?v=b0_kn3ds-J4
I Like To Make Stuff
http://www.youtube.com/Iliketomakestuff
Видео How to make a Guitar Case // Woodworking | I Like To Make Stuff канала I Like To Make Stuff
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Make a Vintage Looking Instrument Case.How to Refinish A Guitar | I Like To Make StuffHow to Make a Multi Guitar Stand | I Like To Make StuffAdam Savage's One Day Builds: Eric Idle's Guitar Case!I built a guitar out of a shelf during quarantine !Build your DREAM GUITAR BODY from SCRATCH for $30!!! (feat. Corey Muxlow of Saul Goode Guitars)Mandalorian Helmets Using Small 3d Printers | I Like To Make StuffSimple Modular Work Tables (WITH MAGNETS!) // Woodworking How To | I Like To Make StuffMaking a Guitar | Handcrafted Woodworking | Où se trouve: Greenfield GuitarsEstuche de Guitarra Hecho a Mano | Guitar Case | FabricaciónMaking a Bass Guitar CaseMaking A B Bender Guitar for Rob Scallon | I Like To Make StuffMaking Stunt Props for Action Movies | I Like To Make StuffMaking the Blaster from The Mandalorian // Star Wars Props | I Like To Make StuffMaking an Arcade Cabinet for Mortal Kombat 11 | I Like To Make StuffHow to Renovate a Mudroom | I Like To Make StuffCustom Guitar Build from scratch (NO SHELF this time)Perfect Guitar Pedal Order with Steve VaiHow to Make a Darksaber from Star Wars (Mandalorian / Rebels / Clone Wars) | I Like To Make Stuff