🛠 Building The Modular Articulated Tool Guide System - Gen II
Get the plans for this project here: https://renewablesystemstechnology.com/cyber-trike---electric-lrt.html
Since the first build video was published, I've had a couple of years to think about improvements for the modular articulated tool guide prototype, and how to move forward with a metal version. I'd noticed that a few folks who've downloaded the plans have come up with their own metal versions, so I figured it's time to stop sitting on this design and take it from Sketchup to the real world.
The only tool attachment that I made this time was for the angle grinder, because the table that the tool guide is attached to is intended for metal working only. I'm building a much larger tool guide in the near future that will attach to a 4x8 table and be used for woodworking only, specifically crosscutting sheets of plywood and surface planing. But with the examples that are shown in the first build, I think you folks will easily understand the versatility and can appreciate the convenience of having something like this in the workshop or even for certain tasks on the job site.
If you haven't seen the original tool guide build, you can check it out here: https://www.youtube.com/watch?v=DPL57IxYcD8&t=5s
Support RST on Youtube and earn membership perks:
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join
Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology
Видео 🛠 Building The Modular Articulated Tool Guide System - Gen II канала James Biggar
Since the first build video was published, I've had a couple of years to think about improvements for the modular articulated tool guide prototype, and how to move forward with a metal version. I'd noticed that a few folks who've downloaded the plans have come up with their own metal versions, so I figured it's time to stop sitting on this design and take it from Sketchup to the real world.
The only tool attachment that I made this time was for the angle grinder, because the table that the tool guide is attached to is intended for metal working only. I'm building a much larger tool guide in the near future that will attach to a 4x8 table and be used for woodworking only, specifically crosscutting sheets of plywood and surface planing. But with the examples that are shown in the first build, I think you folks will easily understand the versatility and can appreciate the convenience of having something like this in the workshop or even for certain tasks on the job site.
If you haven't seen the original tool guide build, you can check it out here: https://www.youtube.com/watch?v=DPL57IxYcD8&t=5s
Support RST on Youtube and earn membership perks:
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join
Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology
Видео 🛠 Building The Modular Articulated Tool Guide System - Gen II канала James Biggar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
🛠 Build A Modular Articulated Tool Guide SystemSuper conductor for milling machine!!!Building The 3 kW Reaper Off Grid Wind Turbine - Complete BuildSOPORTE MULTIFUNCION para amoladora, taladro y sierra / Angle Grinder SupportBuilding An Electric Streetfighter Motorcycle - Complete Build & Test Ride!БЕЗУМНЫЙ станок из ВЕЛОСИПЕДНЫХ втулок☀️ Build A DIY Solar TrackerMaking a split nutBuilding The 'Cyber Trike' - Electric Leaning Tadpole (Reverse) TrikeGuida asse X Y con cuscinetti plasma a copiare Pantografo Guide Pantograph copy plasma cuttingSlide Saw With Angle Grinder DiyMaking A Wind Turbine Generator🛠 Build A DIY Vacuum Injection MoldПриспособление для ручного фрезера. Пантограф.Homemade Roller Bender⚡️ Building A Micro Wind Turbine - Complete DIY Build - Plans Available 📄Stół krzyżowy / Координатный стол своими рукамиBuilding An Electric Motorbike...Out Of Plywood?AMOLADORA SIN PELIGROHow to Make an Octopus Sliding Saw at Home