Building The 'Cyber Trike' - Electric Leaning Tadpole (Reverse) Trike

Special thanks to Grepow for sponsoring this video! Check them out here:
http://bit.ly/2u6rhcV

Get the plans: https://www.resystech.com/cyber-trike---electric-lrt.html

Time stamps:
0:00 - Grepow batteries
1:06 - Work
10:44 - Play

Trike Specs
Power: 12 kW continuous, 24 kW peak (~30 hp)
Top speed: 112 kph (programmable to 150 kph)
Torque: 100-300 newton meters (70-200 ft-lb)
Battery: Grepow Li-Po, 74V, 4.3 kWh
Charge time: ~ 1 hour @ 59 amps
Driving range per charge: 60 km avg, ~90 km (60 miles) max.
Motor: brushless, gearless QS 273 12 kW/24 kWp, 17" hub motor
Controller: programmable Kelly KLS72601-8080H
w/ regenerative braking, forward & reverse features
Wheelbase: 59”
Front wheel track: 40”
Wheels:
front - 10x5” MASSFX Yamaha Banshee alloy rims (4x156 BP)
Pneumatico Deli tire 150/80-10
back - 17x6” alloy rim w/ QS 273 hub motor
Metzler Karoo Street tire 180/55-17
Lean angle: 30° in either direction

Get the best of both worlds and hit the trail with this powerful electric reverse trike. With the leaning ability and twice the torque of an avg sport motorcycle, and double the traction and stability at the front wheels, you'll be cornering faster and can easily navigate around obstacles on the trail. This machine handles like a motorcycle, only better.

It's technically a (Frankenstein) conversion, using a modified late 1980's Suzuki 250 Quadrunner chassis, and Yamaha Banshee hubs, brakes, and steering knuckles, though a Banshee or Raptor chassis would be better because it would require less modification to adapt to a leaning suspension and incorporate a swingarm
(I upgraded the front brakes from drums to discs, and used what I already had for parts to keep the costs as low as possible).

The A arms are custom built to a certain specification to make the leaning suspension work properly without negatively affecting things like camber or caster, or create too much tire scrub/wear, which is detailed in the plans that are available at the link above. Their geometry can be adapted to almost any chassis you choose, just be sure that the original steering uses Ackerman geometry and maintain it with the new design mod's. This ensures that each front wheel is angled properly during a low speed turn. In other words, because the 'inside' wheel is travelling around a smaller radius than the outside wheel when turning left or right, it needs to be angled in the direction of the turn a few degrees more than the outside wheel to navigate the turn easily and minimize tire wear.

​All of the heim joints in the front suspension are high quality/heavy duty, and incorporate high misalignment spacers where required to allow for a full 30° lean in either direction (there are different grades of heim joint - don't use the cheapest or they will break!). The swingarm is attached to and supports the main frame with a rear shock absorber from a Suzuki GSXR 1000 motorcycle, which includes a dog bone progressive dampening linkage (a KTM progressive dampening shock absorber is a good substitute for the GSXR shock and linkage). The plans include a full list of all of the components and materials needed to build the leaning suspension and the rest of the trike as shown in the video. ​

The drive system uses a 12 kW/24 kWp (30 hp) electric QS hub motor mounted in a 17"x6" alloy wheel:
https://www.qsmotor.com/product/17-inch-12kw-hub-motor/

The motor is controlled by a KLS72601-8080H programmable controller with regenerative braking, forward and reverse features from Kelly Controls:
https://www.kellycontroller.com/shop/kls-8080h/

DISCLAIMER: This is a prototype vehicle. By purchasing the plans, building and using the prototype as your own for personal or commercial use, you are assuming all responsibility related to that use (resale of the plans is forbidden). Please obey the rules of the road, and wear safety gear.

Support RST on Patreon or Youtube and earn membership perks:
http://www.patreon.com/resystech
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join

Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology

Видео Building The 'Cyber Trike' - Electric Leaning Tadpole (Reverse) Trike канала James Biggar