Make a 3D Printed Arduino Bipedal Robot
Make a bipedal robot with the DIY 3d printed robot kit #YouMakeRobots.
This robot is powered by an Arduino MEGA and 8 standard hobby servo-motors.
YouMakeRobots is a collection of 3d printed parts, electronics and software that work together to provide a fun, accessible and affordable robot building experience. Very similar to Lego bricks, the modular construction allows you to put together simple components to build a wide variety of robots. It is easy to get started. For less than $ 100 you get all the electronics, no soldering required. The 3d printed parts are easy to print and print without support. The code provided allows you to interactively control the robot from the command line.
➡️ Ressources
* Zombie 3D printed biped walking robot: https://youmaketech.com/zombie-walking-robot-youmakerobots/
* More information about #YouMakeRobots: https://www.youmaketech.com/3d-printed-robot-kit-youmakerobots/
* Electronics & Hardware for YouMakeRobots: https://youmaketech.com/electronics-hardware-for-youmakerobots/
⏰ Chapters ⏰
0:00 Intro
0:30 Servo assembly
0:54 Legs
2:30 Attach legs to main body
3:20 Main body
4:28 5 volts DC/DC converter
5:24 Head
5:39 Arduino MEGA
5:57 MEGA sensor shield
6:30 Arms
8:15 Connect electronics & servos
8:49 Programming
9:30 Play!
➡️ Music: Synth Ride / ArtIss / ShutterStock
#YouMakeRobots
Видео Make a 3D Printed Arduino Bipedal Robot канала YouMakeTech
This robot is powered by an Arduino MEGA and 8 standard hobby servo-motors.
YouMakeRobots is a collection of 3d printed parts, electronics and software that work together to provide a fun, accessible and affordable robot building experience. Very similar to Lego bricks, the modular construction allows you to put together simple components to build a wide variety of robots. It is easy to get started. For less than $ 100 you get all the electronics, no soldering required. The 3d printed parts are easy to print and print without support. The code provided allows you to interactively control the robot from the command line.
➡️ Ressources
* Zombie 3D printed biped walking robot: https://youmaketech.com/zombie-walking-robot-youmakerobots/
* More information about #YouMakeRobots: https://www.youmaketech.com/3d-printed-robot-kit-youmakerobots/
* Electronics & Hardware for YouMakeRobots: https://youmaketech.com/electronics-hardware-for-youmakerobots/
⏰ Chapters ⏰
0:00 Intro
0:30 Servo assembly
0:54 Legs
2:30 Attach legs to main body
3:20 Main body
4:28 5 volts DC/DC converter
5:24 Head
5:39 Arduino MEGA
5:57 MEGA sensor shield
6:30 Arms
8:15 Connect electronics & servos
8:49 Programming
9:30 Play!
➡️ Music: Synth Ride / ArtIss / ShutterStock
#YouMakeRobots
Видео Make a 3D Printed Arduino Bipedal Robot канала YouMakeTech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building the ULTIMATE GameBoy for Raspberry Pi PicoLet's build a Game Boy Emulator on a Breadboard!4 MicroPython Games 🕹️ for the DIY Pi Pico Game Boy #shortsDIY RC F-35 Vertical Takeoff & Hover #shortsEnder 5 Pro Direct Drive Upgrade Assembly [BondTech BMG+E3D V6]Hero Me Gen 6 Assembly & TestingMake your own 3D Printed Phone Case with Fusion 360 | Useful 3D PrintsEnder 3 Linear Rail UpgradeRetroGaming on Raspberry Pi Pico 🕹️ Code classic games in MicroPython!Build your own GameBoy with Raspberry Pi Pico 🕹️ DIY GuideKlipperScreen on Ender 3 V2/ProDirect-Drive VS. BowdenBMG E3D V6 Direct-Drive for Ender 3 V2/Pro [Assembly]How To Set Stepper Motor Current / VREF on Ender 3BMG E3D V6 "SpeedDrive" for Ender 3Klipper on Ender 3 😱E3D V6 + BondTech BMG Direct-Drive on Ender 3 V2/Pro3D Printed DIY Robot Kit | Make Your Own Robots!Design Print Build Code Play Repeat! [YouMakeTech Channel Trailer]Hero Me Gen 5 on Ender 3