Ender 5 Pro Direct Drive Upgrade Assembly [BondTech BMG+E3D V6]
Are you ready to push your Ender 5 to the next level?
Convert your Ender 5 / Ender 5 Pro to direct-drive by combining some of the best components available for 3D printing: the BondTech BMG extruder and the E3D V6 hotend.
This direct-drive mount is unlike any other. It was designed after trying a dozen other models and improved on the basis of this experience.
Don't be fooled by the simplicity of this direct-drive mount. As Albert Einstein might says: "Everything should be made as simple as possible, but no simpler”.
This direct drive makes no compromises and is designed with unique requirements:
* Specially optimized for the E3D V6 / BondTech BMG/ BLTouch / 5015 blower fan combo. Get trouble-free extrusion and perfect 1st layer each and every print. Goodbye clogging, goodbye under-extrusion, goodbye manual adjustment of the z-offset with a sheet of paper : Just print!
* Easy to install & maintain: high accessibility, no adjustments. Can be completely disassembled and reassembled in minutes, without having to readjust anything. Allow to reach the highest accuracy/repeatability. No need to periodically change the PTFE tube thanks to the all-metal hotend.
* Perfect retractions: Hotend connected directly to the extruder. The PTFE tube length is only 37mm! This results in more responsive extrusion, cleaner starts & stops and perfect retractions. Compatible with flexible filaments/TPU
* Optimized for Klipper: The high stiffness of the printhead results in less vibrations and allows high accelerations/decelerations
* Minimalist, compact & lightweight: Simple to print (only 3 parts, print support free), install and maintain.
* Highly efficient cooling: Reach high print speeds (up to 150 mm/s), get perfect bridges & overhangs
➡️ 3D printed parts
https://www.youmaketech.com/fvuc
➡️ Music: "Berlin at Night" by Dan Henig (YouTube Studio Audio Library)
Видео Ender 5 Pro Direct Drive Upgrade Assembly [BondTech BMG+E3D V6] канала YouMakeTech
Convert your Ender 5 / Ender 5 Pro to direct-drive by combining some of the best components available for 3D printing: the BondTech BMG extruder and the E3D V6 hotend.
This direct-drive mount is unlike any other. It was designed after trying a dozen other models and improved on the basis of this experience.
Don't be fooled by the simplicity of this direct-drive mount. As Albert Einstein might says: "Everything should be made as simple as possible, but no simpler”.
This direct drive makes no compromises and is designed with unique requirements:
* Specially optimized for the E3D V6 / BondTech BMG/ BLTouch / 5015 blower fan combo. Get trouble-free extrusion and perfect 1st layer each and every print. Goodbye clogging, goodbye under-extrusion, goodbye manual adjustment of the z-offset with a sheet of paper : Just print!
* Easy to install & maintain: high accessibility, no adjustments. Can be completely disassembled and reassembled in minutes, without having to readjust anything. Allow to reach the highest accuracy/repeatability. No need to periodically change the PTFE tube thanks to the all-metal hotend.
* Perfect retractions: Hotend connected directly to the extruder. The PTFE tube length is only 37mm! This results in more responsive extrusion, cleaner starts & stops and perfect retractions. Compatible with flexible filaments/TPU
* Optimized for Klipper: The high stiffness of the printhead results in less vibrations and allows high accelerations/decelerations
* Minimalist, compact & lightweight: Simple to print (only 3 parts, print support free), install and maintain.
* Highly efficient cooling: Reach high print speeds (up to 150 mm/s), get perfect bridges & overhangs
➡️ 3D printed parts
https://www.youmaketech.com/fvuc
➡️ Music: "Berlin at Night" by Dan Henig (YouTube Studio Audio Library)
Видео Ender 5 Pro Direct Drive Upgrade Assembly [BondTech BMG+E3D V6] канала YouMakeTech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Design Print Build Code Play Repeat! [YouMakeTech Channel Trailer]](https://i.ytimg.com/vi/KnK_YFhGUcQ/default.jpg)
![Make a 3D Printed Arduino Bipedal Robot](https://i.ytimg.com/vi/xxoEQ_JWJtk/default.jpg)
![openRC F1 la Formule 1 Télécommandée à Imprimer en 3D 🏎️](https://i.ytimg.com/vi/6zv2GIMNJM0/default.jpg)
![Programming an Arduino Robot with Python 🐍](https://i.ytimg.com/vi/GRBQRneYT0s/default.jpg)
![3D Printed DIY Robot Kit | Make Your Own Robots!](https://i.ytimg.com/vi/ZrdnrW7ZXsA/default.jpg)
![3D Printed Direct-Drive for the Ender 3](https://i.ytimg.com/vi/Zbk0viFC1ew/default.jpg)
![Let's build a Game Boy Emulator on a Breadboard!](https://i.ytimg.com/vi/ThmwXpIsGWs/default.jpg)
![How To Set Stepper Motor Current / VREF on Ender 3](https://i.ytimg.com/vi/k2nm-WetPnU/default.jpg)
![RetroGaming on Raspberry Pi Pico 🕹️ Code classic games in MicroPython!](https://i.ytimg.com/vi/VYeIR5n5Few/default.jpg)
![Make your own 3D Printed Phone Case with Fusion 360 | Useful 3D Prints](https://i.ytimg.com/vi/F8Y0ljO13Oo/default.jpg)
![KlipperScreen on Ender 3 V2/Pro](https://i.ytimg.com/vi/jIFCERxnAXU/default.jpg)
![4 MicroPython Games 🕹️ for the DIY Pi Pico Game Boy #shorts](https://i.ytimg.com/vi/4diN91WKuyE/default.jpg)
![Blokhead Fan Duct Upgrade for Ender 3](https://i.ytimg.com/vi/tYOTPe5ODzk/default.jpg)
![How To Print TPU on Ender 3](https://i.ytimg.com/vi/qy6ELl_-Cu4/default.jpg)
![BMG E3D V6 "SpeedDrive" for Ender 3](https://i.ytimg.com/vi/5T1wr_Bgwgg/default.jpg)
![Hero Me Gen 5 on Ender 3](https://i.ytimg.com/vi/Cz-Ag0OTL7M/default.jpg)
![Build your own GameBoy with Raspberry Pi Pico 🕹️ DIY Guide](https://i.ytimg.com/vi/IP3QVGmd_90/default.jpg)
![Hero Me Gen 6 Assembly & Testing](https://i.ytimg.com/vi/JyRK7ab-JPw/default.jpg)
![Klipper on Ender 3 😱](https://i.ytimg.com/vi/MaUU8stsZPo/default.jpg)
![Testing 5 Ender 3 Fan Duct Upgrades](https://i.ytimg.com/vi/s2jR92SX_Zg/default.jpg)
![Building the ULTIMATE GameBoy for Raspberry Pi Pico](https://i.ytimg.com/vi/yauNQSS6nC4/default.jpg)