DIY Makeover: Coffee table to bench. Before and After. Part 1

DIY Makeover: Coffee table to bench, before and after. PART 1
In this video you will see Sepp and Shelley transforming a coffee table to a bench.

We used:
Drill
Forstner Bit 20mm
Template
Wooden poles 20mm diameter: 12 poles 30cm long, 13 poles 35cm long
Woodlime
Woodwork router
Orbital sander: Grit paper 80,120,180
Hand saw (Table top saw)
Ruler
Pencil
Hammer
3 pieces of wood for the arms and backrest

Drill holes in the table, minimum 5cm from the table edge. Drill holes Using the forstner bit and template (or drill straight without template)
Cut wood for backrest and arms.
Cut the wooden poles to size.
Drill holes in the arms and backrest,
Sand the arms and backrest. Round the edges using a router, and sand again using a grit paper 120/180
Sand the table top and legs
Using woodlime glue, glue poles into place
Glue the arms and backrest into place
Watch Part 2 to see the finished bench on the 9 October 2020!!

Видео DIY Makeover: Coffee table to bench. Before and After. Part 1 канала Sepp n Shelley DIY