Exploring the ECU hardware and testing - Part 1 (Hardware circuit demonstration)
Video Link - Exploring the ECU hardware and testing - Part 2
https://youtu.be/WZk5eMC0sZo
Exploring the ECU hardware and testing - Part 1
This video explains the ECU circuit board and demonstrates the way of crank and cam signal simulation to run the ECU and perform the different testing.
The engine ECU controls the injection of the fuel to the engine and the timing of the spark to ignite it. It determines the position of the rotation using a Crankshaft Position Sensor so that the injectors and ignition system are activated at precisely the correct time. It uses also number of sensor to read the status of the engine in order to run the engine at optimum performance.
The input to the ECU includes the following sensors:
Crank Position Sensor
Cam Position Sensor
Knock Sensor
Engine Coolant Temperature Sensor
Manifold Absolute Pressure or MAP Sensor
Mass Air Flow or MAF Sensor
Oxygen/O2/Lambda Sensor
Fuel Pressure Sensor
Engine Speed Sensor
Throttle Position Sensor
The output from the ECU includes the following devices:
Injectors
Throttle body control
Ignition coil
Load relay output
Malfunction lamp
Fuel pump
Idle control
Видео Exploring the ECU hardware and testing - Part 1 (Hardware circuit demonstration) канала Saud Automation
https://youtu.be/WZk5eMC0sZo
Exploring the ECU hardware and testing - Part 1
This video explains the ECU circuit board and demonstrates the way of crank and cam signal simulation to run the ECU and perform the different testing.
The engine ECU controls the injection of the fuel to the engine and the timing of the spark to ignite it. It determines the position of the rotation using a Crankshaft Position Sensor so that the injectors and ignition system are activated at precisely the correct time. It uses also number of sensor to read the status of the engine in order to run the engine at optimum performance.
The input to the ECU includes the following sensors:
Crank Position Sensor
Cam Position Sensor
Knock Sensor
Engine Coolant Temperature Sensor
Manifold Absolute Pressure or MAP Sensor
Mass Air Flow or MAF Sensor
Oxygen/O2/Lambda Sensor
Fuel Pressure Sensor
Engine Speed Sensor
Throttle Position Sensor
The output from the ECU includes the following devices:
Injectors
Throttle body control
Ignition coil
Load relay output
Malfunction lamp
Fuel pump
Idle control
Видео Exploring the ECU hardware and testing - Part 1 (Hardware circuit demonstration) канала Saud Automation
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Exploring the ECU hardware and testing - Part 2 (fault finding and troubleshooting)ECU Electromagnetic Fault Injection Testing #1استكشاف و فحص كومبيوتر السيارة - الجزء الثاني (تتبع الاعطال و الفحص)Voltlog #225 - Taking A Look Inside A Bosch/Audi ECU EDC15VM+Why Car Electronics are so Complex96 Jeep, No Start, No Com with PCM, No 5v reference (Quick Tips)How to repair automotive computers class 1ECU - How it starts an engineشرح مفهوم محول العزل وتوضيح كيف يعمل لضمان سلامة الانسان و الاجهزه المراد فحصهاRepairing broken traces on a circuit boardBad Engine Control Module Symptoms #FlagshipOne #EngineControlModuleCAN Bus Properties and Troubleshooting💬 How ECUs Work - Technically SpeakingIs a Standalone ECU Worth It?Mercedes ECU Engine Computer Reprogramming.Advance troubleshooting for SMPS plus fast fault find tips for ATX power supplyECM Ground & 5 Volt Interactive WiringIsolation transformer explained and demonstration to show how it can save life and equipment.2006 Ford Escape ECM repairNo Start, Engine Cranks Okay, Troubleshooting With Basic Tools (No Power to Injectors)