Antique Seized Adjustable Wrench - Restoration

In this video I'm going to restore an antique adjustable wrench. My friend found this wrench at the steel waste and I bought it from him for $10. It was rusty and all movable parts were completely stuck. The jaws seemed to be in good condition. I had to soak the whole wrench in rust remover for one day to get it unstuck and I've put it right back into the rust remover for another day after I completely disassembled it. That removed all the rust and the parts almost looked sandblasted after that treatment.
The movable jaw had a lot of play in the t-slot of the body and that's where this restoration begun. First I sanded the guided part of the movable part clean and then I made the t-slot smaller by squishing it together with forging. That all went surprisingly well and it ended up with a perfect fit. I then could file and sand the whole thing completely smooth and gave it a nice coat with nickel plating for rust protection.
The knurled adjustment wheel took quite some time to restore. Especially refiling the whole knurling by hand was very time consuming. I'm not 100% satisfied with the result of the knurling but it was not too bad, still quite an improvement.
The spring was really unique, as it was rectangular shaped. I only sandblasted it and also nickel plated it. Sanding it clean would change the strength of it.
I had to make a new washer because the original one was not thick enough anymore to fit in the body.
Overall I'm very happy how this adjustable wrench has turned out. I really like the brushed finish with the nickel plating.

I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:

Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Carsten Bauer
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Anthony Eufemio
Bendurion
Br. Michael-Francis Smith, OSB
Chris walter
David Barker
Greenstitute
Haitham Al Zir
Josh Ledford
Josh Wasserman
Joshua Bentley
Lambda GPU Workstations
Leo
Louie Carboni
Marius Costan
Matt Boothman
Mellissa Marcus
Monte Gibbs
Nick Houston
NoLoneSurvivor
Pong Lenis
potokslow
StevenVR
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Ajna
Alex Bindon
Alex Breton
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Egerton
Andrew Phillips
Arni Bjorgvinsson
audi4444player
Blake T
brad ashmore
Brian Hoerl
Chad Bryant
Chris Brentano
Crystal Cash
Daniel Varga
Dave Hardware
Diriector_Doc
Embiss
Ethereals
flowercrownbouncer
Frankie DeSantis
Geoffroy
Grant Daniel
Grok Senften
Haley McFadden
Hunter R.
Jack Curry
Jason Koi
Jeremy Cole
justin f.
Karl R
Kelly Imgrund
Ken Rosso
Kurt Gazow
Landon Burgener
Marc Cerisier
Mellissa McConnell
Michael Lamp
Mike Donaldson
Noah Schwarz
Pasacal Schmikal
Peter Cyprian
Ray Yeager
Regis Vincent
Rev. Gina Pond
Scott Marshall
Sergei Shvartsman
Suiros
Svenja Kuckla
Tim Holt
Trevor Kam
Tucker Ifft
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, it's not my language. I try my best to improve my technical english.

Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
https://youtu.be/c04x6ZF9kKc

„I make a new one“ T-Shirts:
https://teespring.com/stores/my-mechanics

My Main Channel:
https://www.youtube.com/c/mymechanics

My Second Channel:
https://www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
https://www.patreon.com/mymechanics

Follow me on Instagram:
https://www.instagram.com/my_mechanics/

My Facebook Page:
https://www.facebook.com/My-mechanics-1966277857002099/

Видео Antique Seized Adjustable Wrench - Restoration канала my mechanics