Part #8 FINAL Intake Leak 3800
Hope you enjoyed the series:
Parts replaced and items done while I had the chance:
Serpentine Belt: https://shop.advanceautoparts.com/p/carquest-by-dayco-poly-rib-belt-premium-5060455/19270558-p?c3ch=PLA&c3nid=19270558-P&adtype=pla_with_promotion&product_channel=online&store_code=&gclid=EAIaIQobChMIzbTztaX85QIVgp-zCh2gcwAOEAQYASABEgIHs_D_BwE&gclsrc=aw.ds
Tensioner Pulley (even if it didn't need it)https://www.amazon.com/ACDelco-38267-Professional-Automatic-Tensioner/dp/B000IZ15UG/ref=asc_df_B000IZ15UG/?tag=hyprod-20&linkCode=df0&hvadid=331942329025&hvpos=1o5&hvnetw=g&hvrand=2109078003342316799&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012654&hvtargid=pla-649288570735&psc=1
Upper intake gasket with upper intake (Plenum)https:/
/www.1aauto.com/chevy-buick-pontiac-olds-upper-intake-manifold-gasket/i/1aegs00185?f=690066&y=2003
Lower intake gaskets: https://www.partsgeek.com/catalog/2003/chevrolet/impala/engine_mechanical/intake_plenum_gasket.html
All O-rings for fuel injectors: https://www.partsgeek.com/catalog/2003/chevrolet/impala/fuel_injection/fuel_injector_o-ring_kit.html
Gasket for thermostat: https://www.partsgeek.com/gbproducts/DC/3348-05093511.html?utm_source=google&utm_medium=ff&utm_content=DN&utm_campaign=PartsGeek+Google+Base&utm_term=2000-2003+Chevrolet+Impala+Thermostat+Gasket+VR+Gaskets+00-03+Chevrolet+Thermostat+Gasket+2001+2002&utm_source=google&utm_medium=ff&utm_campaign=PartsGeek+Google+Basecid=6774379819&aid=79287199093&keyword=825337969860%3A%3Apla-825337969860&kid=825337969860&gclid=EAIaIQobChMI1OK1g6f85QIVy5yzCh0PwwaZEAQYAyABEgJ3V_D_BwE
Radiator Hose: https://www.partsgeek.com/catalog/2003/chevrolet/impala/cooling_system/radiator_hose.html
Thermosat
Top and Bottom radiator hoses and clamps:
Sparkplugs:https://www.partsgeek.com/catalog/2003/chevrolet/impala/engine_electrical/spark_plug.html
Spark plug wires: https://www.amazon.com/Performance-10-2MM-Ignition-2000-2009-Hummer/dp/B07MNQTFJN/ref=asc_df_B07MNQTFJN/?tag=hyprod-20&linkCode=df0&hvadid=331942329025&hvpos=1o2&hvnetw=g&hvrand=3424290317122982957&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012654&hvtargid=pla-643926220246&psc=1
Cleaned throttle body:
Cleaned injectors:
Cleaned and polished both motor mounts (aluminum)
Cleaned and painted the valve covers and gaskets
Used 200, 500, 1000, and 2000 grit sanding to prep
before painting any of the plastics
Port and Polished the Lower intake manifold
Changed the oil and filter
Coolant refill
New heat shield hoses for all wiring
I took around 5-7 hours to do this repair. I took more time to video the process. I am not a shop mechanic but can do a few things. I could have done all the items listed in 3-4 hours. A shop mechanic can do it much faster. I did this because I think I saved some $$ by doing so.
I hope you enjoyed the videos. I know some were boring or long. I wanted to make it so anyone can view it and do this job. It isn't hard. You can do anything if you have the mind to do so. Keep your shop clean and tools clean.
Leave a comment if you have any questions.
Regards,
M130CARBINE
Видео Part #8 FINAL Intake Leak 3800 канала Marty Of All Trades
Parts replaced and items done while I had the chance:
Serpentine Belt: https://shop.advanceautoparts.com/p/carquest-by-dayco-poly-rib-belt-premium-5060455/19270558-p?c3ch=PLA&c3nid=19270558-P&adtype=pla_with_promotion&product_channel=online&store_code=&gclid=EAIaIQobChMIzbTztaX85QIVgp-zCh2gcwAOEAQYASABEgIHs_D_BwE&gclsrc=aw.ds
Tensioner Pulley (even if it didn't need it)https://www.amazon.com/ACDelco-38267-Professional-Automatic-Tensioner/dp/B000IZ15UG/ref=asc_df_B000IZ15UG/?tag=hyprod-20&linkCode=df0&hvadid=331942329025&hvpos=1o5&hvnetw=g&hvrand=2109078003342316799&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012654&hvtargid=pla-649288570735&psc=1
Upper intake gasket with upper intake (Plenum)https:/
/www.1aauto.com/chevy-buick-pontiac-olds-upper-intake-manifold-gasket/i/1aegs00185?f=690066&y=2003
Lower intake gaskets: https://www.partsgeek.com/catalog/2003/chevrolet/impala/engine_mechanical/intake_plenum_gasket.html
All O-rings for fuel injectors: https://www.partsgeek.com/catalog/2003/chevrolet/impala/fuel_injection/fuel_injector_o-ring_kit.html
Gasket for thermostat: https://www.partsgeek.com/gbproducts/DC/3348-05093511.html?utm_source=google&utm_medium=ff&utm_content=DN&utm_campaign=PartsGeek+Google+Base&utm_term=2000-2003+Chevrolet+Impala+Thermostat+Gasket+VR+Gaskets+00-03+Chevrolet+Thermostat+Gasket+2001+2002&utm_source=google&utm_medium=ff&utm_campaign=PartsGeek+Google+Basecid=6774379819&aid=79287199093&keyword=825337969860%3A%3Apla-825337969860&kid=825337969860&gclid=EAIaIQobChMI1OK1g6f85QIVy5yzCh0PwwaZEAQYAyABEgJ3V_D_BwE
Radiator Hose: https://www.partsgeek.com/catalog/2003/chevrolet/impala/cooling_system/radiator_hose.html
Thermosat
Top and Bottom radiator hoses and clamps:
Sparkplugs:https://www.partsgeek.com/catalog/2003/chevrolet/impala/engine_electrical/spark_plug.html
Spark plug wires: https://www.amazon.com/Performance-10-2MM-Ignition-2000-2009-Hummer/dp/B07MNQTFJN/ref=asc_df_B07MNQTFJN/?tag=hyprod-20&linkCode=df0&hvadid=331942329025&hvpos=1o2&hvnetw=g&hvrand=3424290317122982957&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012654&hvtargid=pla-643926220246&psc=1
Cleaned throttle body:
Cleaned injectors:
Cleaned and polished both motor mounts (aluminum)
Cleaned and painted the valve covers and gaskets
Used 200, 500, 1000, and 2000 grit sanding to prep
before painting any of the plastics
Port and Polished the Lower intake manifold
Changed the oil and filter
Coolant refill
New heat shield hoses for all wiring
I took around 5-7 hours to do this repair. I took more time to video the process. I am not a shop mechanic but can do a few things. I could have done all the items listed in 3-4 hours. A shop mechanic can do it much faster. I did this because I think I saved some $$ by doing so.
I hope you enjoyed the videos. I know some were boring or long. I wanted to make it so anyone can view it and do this job. It isn't hard. You can do anything if you have the mind to do so. Keep your shop clean and tools clean.
Leave a comment if you have any questions.
Regards,
M130CARBINE
Видео Part #8 FINAL Intake Leak 3800 канала Marty Of All Trades
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
**DIY DEAD BLOW HAMMER**THE SMARTEST JACK ON EARTH. STOP FLOORS FROM SAGGING AND DEFLECTION.Disney inspired Picture Frame Build and AssemblyQuick Sharpening Plane Iron GuideFavorite Cutting Boards You Must SeeDIY Farmhouse Table with BreadboardsWAS IT WORTH IT? I THINK $OMITER CORNERS LIKE A BOSS WITH THIS METHODHow To Customize Awesome Picture Frames DIYMarty Of All Trades at Dega..Drill Press Table/Fence: Make By Lunchtime. Trust Me!!!Best Woodworking Bench For YouQuick Chevron End Table DIYShow This Love To Your Powerstroke 7.3Cutting Boards You Can Actually UsePart #4 INTAKE MANIFOLD LEAK 3 8LQuick Method For Changing Jointer/Planer BladesDIY ROUTER PLANEPart #5 INTAKE MANIFOLD LEAK 3 8LHow To Change Valve Cover Gasket Honda Odyssey