Turn Industrial Shelf Into A Cabinet - Sliding Doors For Shelf
I have an industrial shelf unit in the Project Cave. It looks ugly with stuff piled on all the shelves. There is no other good way to store the items on the shelves, so I needed a way to dress it up. DIY sliding doors will do the trick.
The rails are made out of 2"x3" lumber. Two 1/4" groves were routed the entire length of one 2" side. This operation can be easily done with a table saw as well. Use caution either way. The doors are made out of 2'x3' panels cut to fit the rails. The panels are reversible whiteboard/blackboard combos. The versatility is nice. A solid black background is nice and clean looking while the whiteboard side is nice for notes, cut lists, to do lists, and any other information your project may require. Maybe even a snarky comment at some point.
The homemade sliding doors are a nice simple way to make the Cave look a lot cleaner and more professional. And you are not limited to the combo panels I used. I originally was going to use painted 1/4" plywood.
Please use caution when using any tools. They can cause severe injury or even death. Also, the projects you see me working on are simply that. Projects I am working on. I am not a professional and make no guarantees your work, or my work for that matter, will turn out right. Safety first and when in doubt, call a professional.
Remember to like and subscribe to my channel!
http://www.theprojectcave.com
Видео Turn Industrial Shelf Into A Cabinet - Sliding Doors For Shelf канала The Project Cave
The rails are made out of 2"x3" lumber. Two 1/4" groves were routed the entire length of one 2" side. This operation can be easily done with a table saw as well. Use caution either way. The doors are made out of 2'x3' panels cut to fit the rails. The panels are reversible whiteboard/blackboard combos. The versatility is nice. A solid black background is nice and clean looking while the whiteboard side is nice for notes, cut lists, to do lists, and any other information your project may require. Maybe even a snarky comment at some point.
The homemade sliding doors are a nice simple way to make the Cave look a lot cleaner and more professional. And you are not limited to the combo panels I used. I originally was going to use painted 1/4" plywood.
Please use caution when using any tools. They can cause severe injury or even death. Also, the projects you see me working on are simply that. Projects I am working on. I am not a professional and make no guarantees your work, or my work for that matter, will turn out right. Safety first and when in doubt, call a professional.
Remember to like and subscribe to my channel!
http://www.theprojectcave.com
Видео Turn Industrial Shelf Into A Cabinet - Sliding Doors For Shelf канала The Project Cave
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
US General Magnetic Paper Towel HolderToro CCR3650 Revisited! Snow Last Night and Got Rid of the Smokey Exhaust!Sony Digital Camera As WebcamInstalling A Grommet - Beach Shade SavedDrain Water From A Tank - Champion 4 Flapper Leaves Too Much WaterHappy Halloween From the Project Cave! Carving Up A Jack-O-LanternDragon Chasing ButterfliesFord 5.0 V8 T-Pipe Coolant Leak Update!Plasti Dip Truck BadgesNew Legs For A Broken Tripod Lamp!EZ Vehicle Maintenance 101: Replacing a Car BatteryWallpaper Border RemovalBreak Down Miter Saw StationHow to Build a Cross Cut Sled for Your Table SawFlat Tire Nail Puncture RepairReplacing Garage Door RollersHusky Torque Wrenches On Sale Again!Park Bench Repair and Restoration! A Simple DIY Park Bench Project Anyone Can Do!EZ Vehicle Maintenance 101: Replace the Engine Air Filter!Lowe’s Gift Cards! On Sale! June 9, 2019Garden Hose Hanger - With Shelf - Success Followed Disaster!