WLED | 3D Design and assembly of my Echo Dot 3 Base Ring
I had posted a short video of my WLED Echo Dot 3 Base Ring but that was just a demonstration. In this one we have a closer look in my 3D design in Fusion 360, and follow the soldering and assemby process.
3D Design Files (STL): https://www.thingiverse.com/thing:4810182
ESP Drivers: https://docs.wemos.cc/en/latest/ch340_driver.html
The amazing WLED Software from Aircookie:
https://github.com/Aircoookie/WLED
https://github.com/Aircoookie/WLED/wiki
https://install.wled.me/
Wi-Fi Access Point: WLED-AP
Default Password: wled1234
Web Server IP: 4.3.2.1
Видео WLED | 3D Design and assembly of my Echo Dot 3 Base Ring канала Panagiotis Vollas
3D Design Files (STL): https://www.thingiverse.com/thing:4810182
ESP Drivers: https://docs.wemos.cc/en/latest/ch340_driver.html
The amazing WLED Software from Aircookie:
https://github.com/Aircoookie/WLED
https://github.com/Aircoookie/WLED/wiki
https://install.wled.me/
Wi-Fi Access Point: WLED-AP
Default Password: wled1234
Web Server IP: 4.3.2.1
Видео WLED | 3D Design and assembly of my Echo Dot 3 Base Ring канала Panagiotis Vollas
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![WLED Ring | Solar Water Heater Temperatures](https://i.ytimg.com/vi/7NlwI8egSAM/default.jpg)
![When you combine WLED, Home Assistant, Alexa and PC aRGB!](https://i.ytimg.com/vi/2vGvGrk_DF8/default.jpg)
![Tasmota #04 | DIY Smart Plug Project | Multipress to change device function](https://i.ytimg.com/vi/EwwsDUylA10/default.jpg)
![Tasmota #07 | Show remote sensors with MQTT & KNX Events in SSD1306 | Compile online with GitPod](https://i.ytimg.com/vi/nIBMtd2vUZo/default.jpg)
![ESP Media Player | Addressable LED effect while playing](https://i.ytimg.com/vi/GszaerVACX0/default.jpg)
![Tasmota #06 | SSD1306 Display | Show Sensor data with Displaytext and rules](https://i.ytimg.com/vi/_Zkw-24IwIw/default.jpg)
![Tasmota #02 | Router Fan Project | Sensor & Switches in Rules](https://i.ytimg.com/vi/HWbju0wQX_U/default.jpg)
![WLED Soundreactive | 3D printed 4x4 LEDs](https://i.ytimg.com/vi/RtlWGWxMGVg/default.jpg)
![My WLED Lamp | 3 paraller strips - no shadows](https://i.ytimg.com/vi/jIu5D2NF_Sk/default.jpg)
![Tasmota #03 | Controling other Tasmota & WLED | Multipress & Websend](https://i.ytimg.com/vi/2ItsP1MCx4g/default.jpg)
![Tasmota #05 | Smart Fan v3 with LED Buttons | Interlock](https://i.ytimg.com/vi/7WdWsjLnuKY/default.jpg)
![Tasmota #01 | Closet Led Project | From Introduction to Timers in Rules](https://i.ytimg.com/vi/1OzySRCVnRo/default.jpg)
![Xiaomi Zigbee Door & Window Sensor | Unboxing & Setup in Home Assistant (ZHA)](https://i.ytimg.com/vi/QR98IJGJXZg/default.jpg)
![Smart Fan Project v2| Tasmota interlock for relays](https://i.ytimg.com/vi/7E3F7Wt4txM/default.jpg)