Stihl 034 Super Resurrected....AGAIN

This Stihl 034 Super was the first saw I ever worked on - split the case, replaced bearings, air filter, bar, spikes, and installed a Meteor piston and rings. The original case ended up cracking at the pin for the chain brake mechanism so I bought a MS360 crankcase and moved everything over.

a few things were different - had to buy 5mm brass rivets and drill out the starter cover with a 1/4" bit, new 5mm bolts for said holes, as well as the cupped washer bolt combo for the flywheel side of the brake handle. The plate for the bar tension mechanism was also shaped differently but everything else was the same. I used the crank, bearings, and seal that came with the MS360 case so I have a spare set if needed in the future.

Waiting for the oil pump line to arrive which is why the clutch is not on yet.

#stihl #chainsaw #chainsawrepair #diy #recycle

Видео Stihl 034 Super Resurrected....AGAIN канала Proteus