Загрузка страницы

Terminating CAT 5 (Ethernet) Cable into a RJ45 Connector Including Testing and Full Demonstration

Student training aid for how to terminate and test CAT 5 Ethernet cable. Full demonstration on the terminating go both the face plate and RJ45 connector. Using a punch down tool, RJ45 crimping tool and cable tester. Talks about band 1 and band 2 voltages and the need for segregation.

Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2 and 3.

▶️ FACEBOOK https://www.facebook.com/gshelectrical/

▶️ INSTAGRAM https://instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0/

▶️ TWITTER https://mobile.twitter.com/gsh_electrical

#GSHElectrical #Electricaltrainingvideos

Видео Terminating CAT 5 (Ethernet) Cable into a RJ45 Connector Including Testing and Full Demonstration канала GSH Electrical
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
26 июня 2017 г. 15:34:10
00:11:35
Другие видео канала
Terminating/Testing Network Cables - CAT 3, CAT5, CAT6, CAT 7, CAT 8Terminating/Testing Network Cables - CAT 3, CAT5, CAT6, CAT 7, CAT 8Ring Final Circuit Testing for Sockets Wired in 2.5 Twin and CPC Cable (Twin and Earth Cable)Ring Final Circuit Testing for Sockets Wired in 2.5 Twin and CPC Cable (Twin and Earth Cable)How to Chase a Wall and Fit a Flush Single or Twin Socket Box In a Plastered Brick Walls (Chasing)How to Chase a Wall and Fit a Flush Single or Twin Socket Box In a Plastered Brick Walls (Chasing)AM2 and AM2S 10 Stages of Safe Isolation for a 3 Phase Distribution Board (3 Phase Supply) How ToAM2 and AM2S 10 Stages of Safe Isolation for a 3 Phase Distribution Board (3 Phase Supply) How ToConnect Cat6 cable to jackConnect Cat6 cable to jackAM2 or AM2s Insulation Resistance Testing of 2 Way and Intermediate Switching Using Guidance Notes 3AM2 or AM2s Insulation Resistance Testing of 2 Way and Intermediate Switching Using Guidance Notes 3On-Site Consumer Unit Change (Fuse Board or Fuse Box Change) Includes Live and Dead TestingOn-Site Consumer Unit Change (Fuse Board or Fuse Box Change) Includes Live and Dead TestingHow to Make off a SWA Cable Gland (Steel Wire Armored Cable) Step By Step DemonstrationHow to Make off a SWA Cable Gland (Steel Wire Armored Cable) Step By Step DemonstrationHow to Wire Up Ethernet Plugs the EASY WAY! (Cat5e / Cat6 RJ45 Pass Through Connectors)How to Wire Up Ethernet Plugs the EASY WAY! (Cat5e / Cat6 RJ45 Pass Through Connectors)Electrical Practical Skills Terminating SY Cable (How to Terminate SY Flex)Electrical Practical Skills Terminating SY Cable (How to Terminate SY Flex)AM2S and/or AM2 Training, Preparation, Revision - Sample -  3 Phase Motor And D.O.L. StarterAM2S and/or AM2 Training, Preparation, Revision - Sample - 3 Phase Motor And D.O.L. StarterFitting 'RJ45' plugs to CAT5e CableFitting 'RJ45' plugs to CAT5e CableBasic Techniques For Clipping, Dressing and Bending PVC Twin Cables (Twin and Earth Cables) (How to)Basic Techniques For Clipping, Dressing and Bending PVC Twin Cables (Twin and Earth Cables) (How to)AM2 and/or AM2S  - Central Heating / Sustainable Energy Control CircuitAM2 and/or AM2S - Central Heating / Sustainable Energy Control CircuitLighting Circuit 2 Plate Method Taking the Feed to the Switch and Connecting a 1 Way Switch & LightLighting Circuit 2 Plate Method Taking the Feed to the Switch and Connecting a 1 Way Switch & LightHow to Test a Ring Final Circuit - Ring Main or Socket Circuit - Ring Continuity & Polarity TestsHow to Test a Ring Final Circuit - Ring Main or Socket Circuit - Ring Continuity & Polarity TestsSWA Cable - Steel Wire ArmouredSWA Cable - Steel Wire ArmouredWhat Ethernet Cable to Use? Cat5? Cat6? Cat7?What Ethernet Cable to Use? Cat5? Cat6? Cat7?How To: Terminate an Unshielded Cat6/6A RJ45 PlugHow To: Terminate an Unshielded Cat6/6A RJ45 PlugHow to wire a network socket | Cat 5 | Cat 6How to wire a network socket | Cat 5 | Cat 6
Яндекс.Метрика