Pedal Pal FX - PAL 800 JCM Emulator

Buy Now: https://goo.gl/YADgZ2

Welcome back to ProGuitarShop and ToneReport.com.Today we're palling around with the PAL800 JCM Emulator, from PedalPalFX. The JCM Emulator is a painstakingly engineered replica of the vaunted Marshall JCM 800 preamp section. Featuring the exact same control scheme of the JCM 800, PedalPalFX takes the schematic of the original amp, breaks it down and delivers an exact replica using FETs instead of tubes. Just like real valves, the FETs are carefully audited in the circuit and biased accordingly, with each unit thoroughly tested. The result is a true artisan overdrive that is true to the source material. The Gain knob of the JCM Emulator works like the preamp volume on the original 800 but with an even wider range, giving you everything from low-wattage Bluesbreaker tones to singing '80s drive to hell-raising '90s hard rock crunch. Just like a real amp, the JCM Emulator responds incredibly well to volume knob cleanup, reining in the gain while altering your pick attack. The Emulator's three-band EQ stays true to a traditional Marshall tone stack, and delivers interactive bands that are augmented by the Presence control. If that's not enough EQ for you, the Emulator packs a "Master Tone" trimpot on the inside for further tone shaping. This host of tone controls keeps your tone entrenched in the mix regardless of guitar, amp, or any amount of pedals before or after the Emulator. Each JCM Emulator is hand-biased, built and tested in Venezuela.

Видео Pedal Pal FX - PAL 800 JCM Emulator канала ProGuitarShopDemos