Canon EOS 1200D / Rebel T5 IR Cut-off filter removal + my disassembly work-flow

In this video you can see what my work-flow is if I have to disassemble a device that I have never taken apart jet.

So I am taken apart a new 1200D Canon camera because I want to remove the Infra-red Cut-off filter.
It has already bean done for many cameras already but I could not find one for the 1200D.

What you are going to see is:
My thinking proses regarding disassembling products. (that why this movie is longer than other movies)
The problems I found and decisions I had to make.

This is probably not a real good guide for removing the IR Cut-off filter.
Because this is the first time I have done this.
I have probably made a ton of mistakes but in the end it works for me for now.

0:0:01 Intro.
0:2:21 Lets take it apart.
0:19:20 Draining flash capacitor
0:36:24 Back PCB is removed.
0:43:34 APS-C CMOS Sensor is removed.
0:51:34 Removing the IR filter.
0:56:38 Start reassembly.
1:00:00 Its back to getter.
1:02:31 First sample pictures.
1:03:50 Final reassembly.
1:05:16 Some IR-pass filter content.
1:10:05 Good by.
Thumbs up for people that will watch the hole movie :p

Видео Canon EOS 1200D / Rebel T5 IR Cut-off filter removal + my disassembly work-flow канала The Tweaker