Principle of a simple AB power amplifier
The amplification is given by the feedback of 2 resistors. The cross-current can be adjusted with the 600k and the 1M resistors.
The output stage does not require any complementary transistors!
(In real life, the circuit still has to be provided with various current limitations, since excessive power is lost at certain components when overdriven).
Circuit Source: https://everycircuit.com/circuit/5901329737973760
▶️ Get Digital Oscilloscope: https://s.click.aliexpress.com/e/_DFz1tpb
Видео Principle of a simple AB power amplifier канала DIY7
The output stage does not require any complementary transistors!
(In real life, the circuit still has to be provided with various current limitations, since excessive power is lost at certain components when overdriven).
Circuit Source: https://everycircuit.com/circuit/5901329737973760
▶️ Get Digital Oscilloscope: https://s.click.aliexpress.com/e/_DFz1tpb
Видео Principle of a simple AB power amplifier канала DIY7
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Simple Audio AmplifierDifferent Self-Tapping ScrewsFM TransmitterJigsaw BladeDisassembled Clutch Secondary/Slave Cylinder From Honda Civic 1996Insane Voltage Regulator1 or 2 | Spirit Level ToolsMeasuring Capacitance Using Digital MultimeterBig Self-Tapping ScrewTime and Inductors1 or 2 | Light BulbsTrigger with set-resetTorque Wrench 3Pen-Type Digital MultimeterWind turbine charge controller10M Measuring TapeWheel Studs and Lug NutsChisel ToolSoviet Army Military FlaskCar battery voltage indicator