Frosted Glass Build Plate Revisited
Hi Guys!
A while back I frosted my old glass build plate to see if I could print without glue. You can view the video here: https://www.youtube.com/watch?v=b1zZHgRJm8g
It worked at first, but during a long print there was a massive failure where the print popped off the build plate and for a few hours the item was stuck to the extruder. That was when I had all kinds of problems with my nozzle, nozzle throat, etc. After that I went back to the stock glass build plate and glue.
Monday morning I decided to refrost the build plate to see if by making it rougher and more uniform in texture, would the prints stay stuck.
So in this video I do just that. The build plate came out with a lot more texture and more uniform than before. To test it, I printed a frog for my wife. You can find the model here: http://www.thingiverse.com/thing:182144 The frog was scaled to 1.6% in Cura.
It printed great! I'm going to try using this plate for several more prints on and off camera to see if it actually works before committing to it.
Thank you very much for watching!!!
Follow me on Twitter @JShawsTidbits
Like me on Facebook www.facebook.com/JimmyShawsTidbits
Email me JimmyShawsTidbits@gmail.com
Please share my channel www.youtube.com/c/JimmyShawsTidbits1
Видео Frosted Glass Build Plate Revisited канала Jimmy Shaw's Tidbits
A while back I frosted my old glass build plate to see if I could print without glue. You can view the video here: https://www.youtube.com/watch?v=b1zZHgRJm8g
It worked at first, but during a long print there was a massive failure where the print popped off the build plate and for a few hours the item was stuck to the extruder. That was when I had all kinds of problems with my nozzle, nozzle throat, etc. After that I went back to the stock glass build plate and glue.
Monday morning I decided to refrost the build plate to see if by making it rougher and more uniform in texture, would the prints stay stuck.
So in this video I do just that. The build plate came out with a lot more texture and more uniform than before. To test it, I printed a frog for my wife. You can find the model here: http://www.thingiverse.com/thing:182144 The frog was scaled to 1.6% in Cura.
It printed great! I'm going to try using this plate for several more prints on and off camera to see if it actually works before committing to it.
Thank you very much for watching!!!
Follow me on Twitter @JShawsTidbits
Like me on Facebook www.facebook.com/JimmyShawsTidbits
Email me JimmyShawsTidbits@gmail.com
Please share my channel www.youtube.com/c/JimmyShawsTidbits1
Видео Frosted Glass Build Plate Revisited канала Jimmy Shaw's Tidbits
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Yosemite Valley View 4/15/202306/11/2018 Day Trip to Mono Lake3D Printed Rope Container on the Artillery 3D SW-X2Just a quick updateCalvin & Jimmy / COPPA and how it will change our channels3D Printed Gargoyle On The Tevo Tarantula ProRadioactive Granite Rock at the base of Cascade Falls Yosemite National Park #radiation #radioactiveHappy Thanksgiving!Happy Global 3D Printing Day! Rigid.Ink PLA Plus3D Printed RV Water Hose Strain Relief04 /17/2022 SpaceX NROL 85 Launch From Vandenburg SFB3D Printed 450% Walking Nemo MK2Unboxing a Wish Dot Com Soldering Station3D Printed Rabbit Planter / Candy Dish. Happy Easter!Comparing some radioactive antiques I have to the Compass I Found YesterdayYosemite Valley View 6/8/2024Calvin & Jimmy & PreciousAntique Radioactive Tea PotCalvin & Jimmy (AKA Two Idiots) Install A Curt XD Hitch On A 2008 Toyota TundraYosemite Falls 6/8/20243D Printed RV Compartment Fishing Pole Holder