Audi 2.7t Cylinder Head Install B5 S4
Installing the heads on the motor build for my b5 s4. Built bottom end with Rosten Rods, the heads are all stock but we’re stripped and rebuilt due to a bent valve which was a result of catastrophic bottom end failure due to a thrown rod.
Music Courtesy of: Niwel
Видео Audi 2.7t Cylinder Head Install B5 S4 канала 4uattros4
Music Courtesy of: Niwel
Видео Audi 2.7t Cylinder Head Install B5 S4 канала 4uattros4
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Audi B5 S4 2.7t Timing Belt, Water-Pump and Thermostat InstallB5 S4 Cruise to Euro Summit Invitational (Finally Some Turbo Noise)Blown Audi 2.7T Engine TeardownAudi RS4 B5 2.7 Biturbo Engine Rebuild324 Oldsmobile Cracked Cylinder Head Repair5 Things I Hate About My B5 S4Audi B5 S4 | What Wheels FitAudi B5 S4 2.7t Head Rebuild ( Camshaft Install and Valve Keeper Install)Tools Needed to Work On Your Audi S4Audi B5 2.7T Build | The 2.8 Heads Get Smoothed…AUDI B5 S4 TIMING BELT AND CYLINDER HEAD REMOVALCrazy Bi-Turbo Audi Maintenance Procedures - Camshaft Seal and Gasket ReplacementAudi B5 S4 SRM K24 Turbo InstallAudi 2.7t Timing Belt. B5 S4, C5 ALLROAD and A6 with 2.7tAudi B5 S4 2.7t Flywheel, Clutch and Transmission InstallAudi S4/ RS4 B5 Stage 3 (S-Performance) 2,7 bi-turbo Umbau/Rebuilding800 HP Audi RS4 | Justin's B5Audi - Head Comparison | 2.7t vs 2.8B5 S4 Motor Pull / Engine Removal DIYAudi B5 2.7T Build | Assembling the 2.8 Heads and the 2.7T Block