Audi 2.7t Timing Belt. B5 S4, C5 ALLROAD and A6 with 2.7t

UPDATE: 12-3-17. If you Install the right timing belt cover before the viscous fan pulley the right timing belt cover will go on easier.

After removing the front bumper. Remove the inter-cooler shroud. This will allow the lock carrier to move further forward. This part was missing from the car I was working on.

Best camera views and illustration. Include torque specification in newton meters and pound inch/feet.

TIP:
If you are doing the job with the vehicle in the service position. Removing the vibration damper and viscous fan pulley bolts is done mostly by feel...you cannot see them from above.

Align the timing mark back to the same position it was before you remove it then rock left + right to feel for the notch in the pulley.

To install the viscous fan pulley, catch the top-most small 5mm bolt in the pulley first, then the other bolt afterwards. The other internal bolt is located about 85-90% right of the viscous fan thread when looking down on the pulley.

The camshaft sprocket bolt size is 16mm socket.

Видео Audi 2.7t Timing Belt. B5 S4, C5 ALLROAD and A6 with 2.7t канала Patrick Neil