etrailer | Review of TecNiq Trailer Lights - Clearance Lights - TN53PV

Click for more info and reviews of this TecNiq Trailer Lights:
https://www.etrailer.com/Trailer-Lights/TecNiq/TN53PV.html
Check out some similar Trailer Lights options:
https://www.etrailer.com/dept-pg-Trailer_Lights-sf-Clearance_Lights.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-TecNiq-Trailer-Lights-Clearance-Lights-TN53PV.aspx
Hello everybody, this is Jeff at etrailer. Today we're gonna take a look at the TecNiq S14 LED marker light and it's a stud mount design. Now this compact stud-mounted marker light's gonna give you bright, reliable visibility and even the flexibility to meet the PC or P2 requirements depending on how you're gonna mount this all while keeping the fasteners hidden for a nice clean finish. Now I am gonna hook this up to some 12-volt power just to show you how bright it is. You can see it's a single wire and then it'll ground with using the stud. So if I get my wires here, we go ahead and hook our power wire up.

Whoops. Let's get that again. Hook up our power wire. And with that hooked up, we'll go ahead and turn on our power and then we'll ground it again by touching the stud back here. You'll see just by touching that, that's your ground.

So you'll see when we touch it, there's the light. What we'll go ahead and do is turn off the overhead lights. Now you can see when I ground it, it gives you a nice bright two LEDs in there, bright light. Go ahead and turn back on our overhead light. Disconnect it.

Now it's one and three quarter inches long, one-inch wide, about a half inch deep, so it's gonna fit neatly on most surfaces while still putting out a strong illumination from those two amber LEDs. It does provide reliable brightness for clearance of marking needs. And again, it'll run on nine to 14 volts DC. It's very efficient and consistent without dimming or flickering. It does use a TecSeal urethane potting material, which will seal the circuit board completely, protects it from any dust and water intrusion.

It is built to be waterproof and submersible, so whether you're hauling through rain or washing down equipment, it'll stay dry inside and keep working. The housing itself is UV-resistant, prevents fading or cracking from sun exposure. So what's nice is if you have, if you're after a nice clean finish look, the stud mount design we mentioned makes it very easy. The stainless steel ground's gonna stud and it anchors the light securely while hiding any mounting hardware from view. No screws or exposed bolts, just a nice smooth fit. Looks sharp and professional once it's installed. We mentioned a pigtail wire and it uses a standard non-polarized connector. Keeps the wiring simple too. And these are LEDs, so there's no bulbs to replace or parts that will rust out over time. Now if you do have any other additional questions regarding this part or any other item we carry, please feel free to reach out to us so we can help you get all of your questions answered for you. But that's gonna do it for our look at this TecNiq S14 LED marker light in a stud mount design.

Видео etrailer | Review of TecNiq Trailer Lights - Clearance Lights - TN53PV канала etrailer