Outback Caravanning | Tools, Spares & Tips
On outback caravanning trips, car and caravan dealers, even mechanical workshops can be a day or more distant, recovery can be uncertain and costly and you will need to be prepared for that. This video is about the tools and spares that we carry in our car and caravan on our outback journeys, as well as some tips on keeping you rig going when the road gets long and remote. The tools and spares covered in this video relate specifically to the Ford Ranger, its Mazda BT50 derivative and Jayco caravans, but it is the principles that I will also share that apply to any car and caravan that you intend to take into the Australian outback.
Chapters
00:00 Outback Caravanning | Tools & Tips
03:23 Tools and Spares
31:06 Tools and Spares Lists
33:06 Vehicle checking before departure
41:00 Vehicle checking whilst travelling
43:35 Towbar tips
Disclaimer.
This video is intended for generating ideas or entertainment purposes only. Should you choose to make or do anything as depicted on this channel you do so at your own risk. Making and the use of tools can be extremely dangerous. The equipment and methods I use may not work for you and by no means do I suggest that my methods of working are correct. Your shop safety is your responsibility, so I therefore accept NO responsibility or liability for any injuries or accidents you may have if you attempt to replicate the things that I do.
#whitedoggarage #caravan #FordRanger
Видео Outback Caravanning | Tools, Spares & Tips канала whitedoggarage
Chapters
00:00 Outback Caravanning | Tools & Tips
03:23 Tools and Spares
31:06 Tools and Spares Lists
33:06 Vehicle checking before departure
41:00 Vehicle checking whilst travelling
43:35 Towbar tips
Disclaimer.
This video is intended for generating ideas or entertainment purposes only. Should you choose to make or do anything as depicted on this channel you do so at your own risk. Making and the use of tools can be extremely dangerous. The equipment and methods I use may not work for you and by no means do I suggest that my methods of working are correct. Your shop safety is your responsibility, so I therefore accept NO responsibility or liability for any injuries or accidents you may have if you attempt to replicate the things that I do.
#whitedoggarage #caravan #FordRanger
Видео Outback Caravanning | Tools, Spares & Tips канала whitedoggarage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Caravan & Motorhome Toilets | Maintenance and Repair](https://i.ytimg.com/vi/xU6Kd6b-F2E/default.jpg)
![Making a Welding Fixture Table with Extendable Sides](https://i.ytimg.com/vi/41yE_37hw_M/default.jpg)
![Heavy Mattress? Make a Pair of Mattress Lifters](https://i.ytimg.com/vi/FpTVC4LVJCY/default.jpg)
![Making a Portable Camp Kitchen | DIY](https://i.ytimg.com/vi/s_3AWM-GnKk/default.jpg)
![Building a Welder Trolley to Hold MIG and TIG Welders](https://i.ytimg.com/vi/A8p-ZSOAhyU/default.jpg)
![Buying a MIG Welder in Australia | Renegade Industrial 200 Amp MIG](https://i.ytimg.com/vi/jTwYR0f6v70/default.jpg)
![Buying a DIY or Light Industrial MIG Welder | Australia](https://i.ytimg.com/vi/EXkpMwNqPOI/default.jpg)
![Suzuki Motorcycle Rear End Maintenance | Bearings, Wheel Alignment, Brakes](https://i.ytimg.com/vi/PIJ4Xa7PjF0/default.jpg)
![Tuning Suzuki Air Cooled 16 Valve 4 Cylinder Motorcycle Engines](https://i.ytimg.com/vi/fHYe3el_3q0/default.jpg)
![Stripped Thread Repair where Access is Difficult |Two methods](https://i.ytimg.com/vi/hYVteL2D8HU/default.jpg)
![Motorcycle Clutch Problems? | Finding Out What Is Wrong and Fixing It!](https://i.ytimg.com/vi/pIQnTP6AdMw/default.jpg)
![Front Brake Servicing on the 1980s Suzuki GS 16 Valve Motorcycles](https://i.ytimg.com/vi/GavMkhxLYmo/default.jpg)
![Steering Head and Fork Servicing on the 1980s Suzuki GS 16 Valve Motorcycles](https://i.ytimg.com/vi/-mEv_fCMi90/default.jpg)
![Hyundai Accent 60K Service | Fuel Filter, Spark Plugs, Cabin Filter, Oil Change](https://i.ytimg.com/vi/yc7Q4tmE0oE/default.jpg)
![Motorcycle Brake Torque Rod Repair | Machining & Scotch Keys](https://i.ytimg.com/vi/AlUv516lHi4/default.jpg)
![Making a Simple Sheet Goods Carrier | Metal Fabrication & Welding](https://i.ytimg.com/vi/zJoW7zNTyco/default.jpg)
![Making a new front sprocket nut for a motorcycle | Welding & Machining](https://i.ytimg.com/vi/UFexIv6aaCU/default.jpg)
![Making a Legless Camping Table | Oxy-acetylene welding](https://i.ytimg.com/vi/e9fODH_uK08/default.jpg)
![Starter motor not working? Solving motorcycle starting problems](https://i.ytimg.com/vi/hlClh8n1e-4/default.jpg)
![A New Point on an Old Chipping Hammer | machining, Welding](https://i.ytimg.com/vi/nU4vEoCq_hc/default.jpg)