A New Point on an Old Chipping Hammer | machining, Welding
This video features the renovation of an old chipping hammer conversion. The original purpose of the hammer was not clear, but it was repurposed as a chipping hammer. The original conversion was done with a grinder, but to be effective the point or pick end needed to be longer and more pointed. The hammer also needed a better handle. The video shows the machining of a new pick end for the hammer, the setting up and machining of the head to enable the pick to be accurately welded in place and finally the heat treatment.
Major equipment used in this video: Renegade Industrial 200 Amp Inverter Arc Welder , Hafco AL336 Lathe, Hafco HM45 Bench Mill,
Disclaimer.
This video is intended for generating ideas or entertainment purposes only. Should you choose to make or do anything as depicted on this channel you do so at your own risk. Making and the use of tools can be extremely dangerous. The equipment and methods I use may not work for you and by no means do I suggest that my methods of working are correct. Your shop safety is your responsibility, so I therefore accept NO responsibility or liability for any injuries or accidents you may have if you attempt to replicate the things that I do.
#whitedoggarage #chippinghammer #machining
Видео A New Point on an Old Chipping Hammer | machining, Welding канала whitedoggarage
Major equipment used in this video: Renegade Industrial 200 Amp Inverter Arc Welder , Hafco AL336 Lathe, Hafco HM45 Bench Mill,
Disclaimer.
This video is intended for generating ideas or entertainment purposes only. Should you choose to make or do anything as depicted on this channel you do so at your own risk. Making and the use of tools can be extremely dangerous. The equipment and methods I use may not work for you and by no means do I suggest that my methods of working are correct. Your shop safety is your responsibility, so I therefore accept NO responsibility or liability for any injuries or accidents you may have if you attempt to replicate the things that I do.
#whitedoggarage #chippinghammer #machining
Видео A New Point on an Old Chipping Hammer | machining, Welding канала whitedoggarage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Caravan & Motorhome Toilets | Maintenance and Repair](https://i.ytimg.com/vi/xU6Kd6b-F2E/default.jpg)
![Making a Welding Fixture Table with Extendable Sides](https://i.ytimg.com/vi/41yE_37hw_M/default.jpg)
![Heavy Mattress? Make a Pair of Mattress Lifters](https://i.ytimg.com/vi/FpTVC4LVJCY/default.jpg)
![Making a Portable Camp Kitchen | DIY](https://i.ytimg.com/vi/s_3AWM-GnKk/default.jpg)
![Building a Welder Trolley to Hold MIG and TIG Welders](https://i.ytimg.com/vi/A8p-ZSOAhyU/default.jpg)
![Buying a MIG Welder in Australia | Renegade Industrial 200 Amp MIG](https://i.ytimg.com/vi/jTwYR0f6v70/default.jpg)
![Buying a DIY or Light Industrial MIG Welder | Australia](https://i.ytimg.com/vi/EXkpMwNqPOI/default.jpg)
![Suzuki Motorcycle Rear End Maintenance | Bearings, Wheel Alignment, Brakes](https://i.ytimg.com/vi/PIJ4Xa7PjF0/default.jpg)
![Tuning Suzuki Air Cooled 16 Valve 4 Cylinder Motorcycle Engines](https://i.ytimg.com/vi/fHYe3el_3q0/default.jpg)
![Stripped Thread Repair where Access is Difficult |Two methods](https://i.ytimg.com/vi/hYVteL2D8HU/default.jpg)
![Motorcycle Clutch Problems? | Finding Out What Is Wrong and Fixing It!](https://i.ytimg.com/vi/pIQnTP6AdMw/default.jpg)
![Front Brake Servicing on the 1980s Suzuki GS 16 Valve Motorcycles](https://i.ytimg.com/vi/GavMkhxLYmo/default.jpg)
![Outback Caravanning | Tools, Spares & Tips](https://i.ytimg.com/vi/t2S1QE6kaE8/default.jpg)
![Steering Head and Fork Servicing on the 1980s Suzuki GS 16 Valve Motorcycles](https://i.ytimg.com/vi/-mEv_fCMi90/default.jpg)
![Hyundai Accent 60K Service | Fuel Filter, Spark Plugs, Cabin Filter, Oil Change](https://i.ytimg.com/vi/yc7Q4tmE0oE/default.jpg)
![Motorcycle Brake Torque Rod Repair | Machining & Scotch Keys](https://i.ytimg.com/vi/AlUv516lHi4/default.jpg)
![Making a Simple Sheet Goods Carrier | Metal Fabrication & Welding](https://i.ytimg.com/vi/zJoW7zNTyco/default.jpg)
![Making a new front sprocket nut for a motorcycle | Welding & Machining](https://i.ytimg.com/vi/UFexIv6aaCU/default.jpg)
![Making a Legless Camping Table | Oxy-acetylene welding](https://i.ytimg.com/vi/e9fODH_uK08/default.jpg)
![Starter motor not working? Solving motorcycle starting problems](https://i.ytimg.com/vi/hlClh8n1e-4/default.jpg)