Replacing Bumpers on Rails

How to replace cushions on pool tables.
*Here are all the tools we use today. We use better tools and supplies today compared to when the video was shot, but we still employ the same techniques!*
1. CS Osborne Staple Remover
2. Needle Nose Pliers (or a leatherman)
3. A drill with proper attachments to remove screws and bolts
4. A putty knife makes easy to remove old rubbers
5. New Bumpers. This completely depends on you kind of table, but the industry standard cushion is the K-66 Cushion.
6. Cushion Glue (https://www.pooldawg.com/penguin-cushion-adhesive?gclid=EAIaIQobChMIwY-6mrLs2AIVlMhkCh05Uw-mEAYYASABEgK5o_D_BwE)
*OR if you don't want expensive professional grade stuff, go for the Great Planes Thick Super Glue Pro CA*
*7. You would only need NCF Quick glue activator if you are using Super Glue rather than cushion glue.*
8. Marking tool, we just use a pen
9. A good Serrated blade. Leatherman multi-tools actually have high grade knives on their more expensive sets, and thats what we use.
10. Rubber End Facings. We buy ours from Cuestix. Part # TP5145A
11. A Razor Blade makes cutting those facings easier. You will also need Razors for Trimming felt.

For pool table service, we are sometimes called to redo bumpers, so we need to know what we are doing. This video should be studied by our employees before going out to attempt a job like this. Notice the tricks I use to make it work, and never give up because you think its not working or because you're not good enough, because you are good enough! And you know what I always say, if it's good enough, it's perfect, if it's perfect, it's good enough.

Видео Replacing Bumpers on Rails канала Take A Break Spas and Billiards