E46 Replace A/C Expansion Valve & Clean Lines #m54rebuild 24

I began my rebuild when I did a compression test and noticed I had poor compression in cylinders 2-6 (about 142 psi, the bottom of the service limit). Cylinder 1 had 160 psi. A leakdown test showed leakage into each adjacent cylinder. Of course my engine also had the oil consumption problem (1 quart every 1000 miles) that every M54 engine has, which is caused by the oil rings which wear down prematurely (the M52TU used different oil rings which did not have this problem). There was also coolant loss, which I didn't measure precisely.

To see all the videos in the #m54rebuild series: https://www.youtube.com/playlist?list=PLqJG4ZyPIF6OflXtgLWJOFdsiuc-UrZJX

To see all the rebuild specs for the M54/M52 series engines: https://www.dropbox.com/sh/g6fqtycr1lz5ila/AACOP0_5yPGUHx1gkDUyDIBQa?dl=0

While I have easy access, I decided to replace the A/C expansion valve. You don't need to remove the engine to do this.

This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

Видео E46 Replace A/C Expansion Valve & Clean Lines #m54rebuild 24 канала 50sKid