Design principles for efficient, repeated jumpgliding
Design principles for efficient, repeated jumpgliding
by Alexis Lussier Desbiens, Morgan T Pope, David L Christensen, Elliot W Hawkes and Mark R Cutkosky - http://bdml.stanford.edu/
Abstract: Combined jumping and gliding locomotion, or 'jumpgliding', can be an efficient way for small robots or animals to travel over cluttered terrain. This paper presents functional requirements and
models for a simple jumpglider which formalize the benefits and limitations of using aerodynamic surfaces to augment jumping ability. Analysis of the model gives insight into design choices and control strategies for higher performance and to accommodate special
conditions such as a slippery launching surface. The model informs the design of a robotic platform that can perform repeated jumps using a carbon fiber spring and a pivoting wing.
Experiments with two different versions of the platform agree with predictions from the model and demonstrate a significantly greater range, and lower cost-of-transport, than a comparable
ballistic jumper.
Full paper available at: http://iopscience.iop.org/1748-3190/9/2/025009/pdf/1748-3190_9_2_025009.pdf
Видео Design principles for efficient, repeated jumpgliding канала bdmlstanford
by Alexis Lussier Desbiens, Morgan T Pope, David L Christensen, Elliot W Hawkes and Mark R Cutkosky - http://bdml.stanford.edu/
Abstract: Combined jumping and gliding locomotion, or 'jumpgliding', can be an efficient way for small robots or animals to travel over cluttered terrain. This paper presents functional requirements and
models for a simple jumpglider which formalize the benefits and limitations of using aerodynamic surfaces to augment jumping ability. Analysis of the model gives insight into design choices and control strategies for higher performance and to accommodate special
conditions such as a slippery launching surface. The model informs the design of a robotic platform that can perform repeated jumps using a carbon fiber spring and a pivoting wing.
Experiments with two different versions of the platform agree with predictions from the model and demonstrate a significantly greater range, and lower cost-of-transport, than a comparable
ballistic jumper.
Full paper available at: http://iopscience.iop.org/1748-3190/9/2/025009/pdf/1748-3190_9_2_025009.pdf
Видео Design principles for efficient, repeated jumpgliding канала bdmlstanford
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Frishman et al., Enabling In-Bore MRI-Guided Biopsies, IEEE Haptics Symposium 2020Dynamic Quadrotor PerchingSuper wrinkle test of EAPspinybot footAerial Grasping and the Velocity Sufficiency RegionHaptic-Feedback of a Force-Sensing Biopsy NeedleCrazyflie Pitch UpGrappling Space Debris with Gecko-inspired Adhesion --- UPDATEDStickybot: Climbing Smooth Vertical Surfaces with Directional AdhesionForce and Shape Sensing NeedleQuadrotor perch with multiple accelerometersRiSE Robot Platform climbing with Gecko-inspired dry adhesivesTactile Sensing for Small Legged Robots - Bipedal Running ExperimentsPerwler prototype foot cable actuationShape & Force Sensing Needle, 12FBGsGecko surface grasping IROS 2013Spinybot II: Climbing walls with microspinesCeilingQuadOutsideMicroSpine Landing GearRock climbing palm based on arrays of linearly-constrained micro-spines.