1970 Hemi Cuda vs 1971 Buick GS 455 - Stock Drag Race
1970 Plymouth 426 Hemi Cuda (Barracuda) vs 1971 Buick GS 455 - Pure Stock Drag Race (Factory Stock)
First car is a 1970 Plymouth Hemi 'Cuda, obviously with a 426 Hemi. It's opponent is a 1971 Buick Gran Sport 455. It's not a Stage 1 car, but as you'll see it's been built well (following the rules of Pure Stock/Factory Stock racing) and it's runs very well!
Remember, both cars participate in Factory Stock class through F.A.S.T drag racing. Make sure you visit their website. https://www.fastdrags.com
Here are the Factory Stock rules:
Rules
For 1955 to 1979 muscle cars built in United States and Canadian assembly plants with a minimum warranty of 12 months and 12,000 miles.
Drivetrain:
Automatic Transmissions: The transmission and torque converter must be correct for the year, make, and horsepower claimed. Shift improver kits are allowed. After-market shifters are not allowed. No manual valve bodies. No lightweight internal components allowed.
Manual Transmissions: The transmission must be correct for the year, make, and horsepower claimed. 3-speeds may be upgraded to the correct 4-speed if originally available.
Rear Axles:
The rear axle must be of the same manufacturer as the car. Any gear ratio is allowed. Driveshaft safety loops are mandatory on all cars 13.99 and faster!
Engine:
Must be factory correct for the year, model, and horsepower claimed. Dealer installed engines and dealer performed engine modifications are not allowed. Casting numbers must be correct for the year and horsepower claimed including intake manifold, heads, and exhaust manifolds. Modifications are prohibited. Blocks do not have to be "numbers-matching," but they must be the correct displacement. Overbores up to .070" are allowed. Stock cranks only. NO strokers! Random P&G checks are possible. Compression may be increased to the greater of NHRA allowable stock blue print or 1.5 over advertised compression. NHRA
Electrical System:
The battery must be retained in the original location and securely fastened down with the original style hold down. The charging system must be fully operational at all times.
Fuel System and Carburetor:
The carburetor must be correct for the year, make, and horsepower claimed. Jetting and metering changes are permitted. THE CHOKE ASSEMBLY MUST BE IN PLACE AND FUNCTIONAL!
Pulleys:
All pulleys must be factory issue, and they must have the correct diameters for the year and horsepower claimed for the engine.
Valve Train:
The complete valve train must be factory stock for the year, make, and horsepower claimed. Rocker arm ratio must be correct for the year and horsepower claimed. Roller tip rockers allowed as long as correct ratio is used.
Camshaft:
The camshaft must be correct for the model, year, and horsepower claimed for duration, lift, and type of lifter (hydraulic or solid). No roller cams allowed.
Exhaust:
Cast iron exhaust manifolds are mandatory and must be correct for the year, model, and horsepower claimed. NO internal modifications to the exhaust manifolds are allowed. Under no circumstances will headers be allowed, including those cars that came with headers delivered in the trunk. The exhaust system may be upgraded to a maximum of 2.5-inch head and tail pipes.
Ignition System:
The ignition system must be stock, including the distributor, cap, coil, and wires. Points may be replaced with any electronic conversion that fits under the stock distributor cap.
Cooling System:
The radiator must be correct for the year, make, model, and horsepower claimed. No lightweight, aluminum radiators allowed.
Suspension:
Front Suspension: Stock springs and shocks must be retained. Drag springs and shocks that allow excessive lift during launches are NOT allowed.
Rear Suspension: Traction devices are limited to hop-stop bars for the upper control arms on coil-spring cars. Pinion snubbers and clamping of springs are allowed on leaf-spring cars. No slapper bars or ladder bars of any kind are allowed unless originally equipped at the factory.
Tires & Wheels:
Reproduction tires or radial tires only. No soft compound tires of any kind allowed. Retread tires are not allowed. Use of traction compounds or rubber-softening chemicals on tires are strictly prohibited.
Видео 1970 Hemi Cuda vs 1971 Buick GS 455 - Stock Drag Race канала Cars And Zebras
First car is a 1970 Plymouth Hemi 'Cuda, obviously with a 426 Hemi. It's opponent is a 1971 Buick Gran Sport 455. It's not a Stage 1 car, but as you'll see it's been built well (following the rules of Pure Stock/Factory Stock racing) and it's runs very well!
Remember, both cars participate in Factory Stock class through F.A.S.T drag racing. Make sure you visit their website. https://www.fastdrags.com
Here are the Factory Stock rules:
Rules
For 1955 to 1979 muscle cars built in United States and Canadian assembly plants with a minimum warranty of 12 months and 12,000 miles.
Drivetrain:
Automatic Transmissions: The transmission and torque converter must be correct for the year, make, and horsepower claimed. Shift improver kits are allowed. After-market shifters are not allowed. No manual valve bodies. No lightweight internal components allowed.
Manual Transmissions: The transmission must be correct for the year, make, and horsepower claimed. 3-speeds may be upgraded to the correct 4-speed if originally available.
Rear Axles:
The rear axle must be of the same manufacturer as the car. Any gear ratio is allowed. Driveshaft safety loops are mandatory on all cars 13.99 and faster!
Engine:
Must be factory correct for the year, model, and horsepower claimed. Dealer installed engines and dealer performed engine modifications are not allowed. Casting numbers must be correct for the year and horsepower claimed including intake manifold, heads, and exhaust manifolds. Modifications are prohibited. Blocks do not have to be "numbers-matching," but they must be the correct displacement. Overbores up to .070" are allowed. Stock cranks only. NO strokers! Random P&G checks are possible. Compression may be increased to the greater of NHRA allowable stock blue print or 1.5 over advertised compression. NHRA
Electrical System:
The battery must be retained in the original location and securely fastened down with the original style hold down. The charging system must be fully operational at all times.
Fuel System and Carburetor:
The carburetor must be correct for the year, make, and horsepower claimed. Jetting and metering changes are permitted. THE CHOKE ASSEMBLY MUST BE IN PLACE AND FUNCTIONAL!
Pulleys:
All pulleys must be factory issue, and they must have the correct diameters for the year and horsepower claimed for the engine.
Valve Train:
The complete valve train must be factory stock for the year, make, and horsepower claimed. Rocker arm ratio must be correct for the year and horsepower claimed. Roller tip rockers allowed as long as correct ratio is used.
Camshaft:
The camshaft must be correct for the model, year, and horsepower claimed for duration, lift, and type of lifter (hydraulic or solid). No roller cams allowed.
Exhaust:
Cast iron exhaust manifolds are mandatory and must be correct for the year, model, and horsepower claimed. NO internal modifications to the exhaust manifolds are allowed. Under no circumstances will headers be allowed, including those cars that came with headers delivered in the trunk. The exhaust system may be upgraded to a maximum of 2.5-inch head and tail pipes.
Ignition System:
The ignition system must be stock, including the distributor, cap, coil, and wires. Points may be replaced with any electronic conversion that fits under the stock distributor cap.
Cooling System:
The radiator must be correct for the year, make, model, and horsepower claimed. No lightweight, aluminum radiators allowed.
Suspension:
Front Suspension: Stock springs and shocks must be retained. Drag springs and shocks that allow excessive lift during launches are NOT allowed.
Rear Suspension: Traction devices are limited to hop-stop bars for the upper control arms on coil-spring cars. Pinion snubbers and clamping of springs are allowed on leaf-spring cars. No slapper bars or ladder bars of any kind are allowed unless originally equipped at the factory.
Tires & Wheels:
Reproduction tires or radial tires only. No soft compound tires of any kind allowed. Retread tires are not allowed. Use of traction compounds or rubber-softening chemicals on tires are strictly prohibited.
Видео 1970 Hemi Cuda vs 1971 Buick GS 455 - Stock Drag Race канала Cars And Zebras
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![1969 Dodge Super Bee vs 1969 Chevrolet Camaro SS 396 - STOCK DRAG RACE](https://i.ytimg.com/vi/ctp7NG59wEE/default.jpg)
![1970 Buick GSX and 1970 Hemi Cuda Rivalry Muscle Car Of The Week Episode 279 V8TV](https://i.ytimg.com/vi/9Ci173SsFRY/default.jpg)
![Full Build: Turning A 1974 Dodge Dart Into A Pro Street Mopar](https://i.ytimg.com/vi/rWrVUHjLBb4/default.jpg)
![Muscle Car Drags (1987) 426 HEMI vs 429-SCJ vs 455-GS vs 454-LS6 vs Boss 429 vs 455-SD vs 440-6pk](https://i.ytimg.com/vi/AkLvcOeof_k/default.jpg)
![The Black Ghost: Street Racing Legend - 1970 Dodge Challenger 426 Hemi Documentary | HVA](https://i.ytimg.com/vi/Jd0io1zktqI/default.jpg)
![MECUM SOLD $3.5 Million - 1971 Plymouth Hemi Cuda Convertible](https://i.ytimg.com/vi/W5tQm8HBB2Y/default.jpg)
![1969 Barracuda 440 vs 1971 Buick GS455 Stage 1 - PURE STOCK DRAG RACE](https://i.ytimg.com/vi/Hh_nKk7Ce4Y/default.jpg)
![9 Second Buick GSX Stage2 GS Stage1 9.51 @ 140](https://i.ytimg.com/vi/hyXRjiO-oFE/default.jpg)
![1963 Impala SS 409 vs 1969 Oldsmobile Cutlass W31 - PURE STOCK DRAG RACE](https://i.ytimg.com/vi/cTmxUN-Uauo/default.jpg)
![1973 Firebird SD455 vs 1970 Torino Cobra Jet - PURE STOCK DRAG RACE (Best of 3)](https://i.ytimg.com/vi/-JOfXh6pXf0/default.jpg)
![1970 Buick GSX vs 1970 Chevelle SS - PURE STOCK DRAG RACE (Best of 3)](https://i.ytimg.com/vi/-tfgxf25Mh4/default.jpg)
![426 Hemi Challenger 1/4 Mile Drag Car - Racing A Classic](https://i.ytimg.com/vi/cQf9TeTSBm4/default.jpg)
![455 "stage 1" Buick GS -Classic 1970 American Muscle- HEMI killer?](https://i.ytimg.com/vi/X-ZdXABg15Q/default.jpg)
![Muscle Car Drags (1987) "Big Blocks" 454 LS5 - 426 HEMI - 428 SCJ - 455 GS - 440 6pk - 400 Ram Air](https://i.ytimg.com/vi/KYCtEArPDEA/default.jpg)
![1969 Plymouth Road Runner vs 1968 Chevrolet Camaro SS396 PURE STOCK DRAG RACE](https://i.ytimg.com/vi/-wWxmDeo8Zw/default.jpg)
![1969 Corvette 427 L88 vs 1968 Dodge Super Bee 426 Hemi - Pure Stock Drag Race](https://i.ytimg.com/vi/HXYul5gI5NI/default.jpg)
![1967 Chevrolet Impala vs 1968 Plymouth GTX PURE STOCK DRAG RACE](https://i.ytimg.com/vi/6O8hi8ajOJM/default.jpg)
![1969 COPO Camaro ZL1 vs 1971 Duster 340 - PURE STOCK DRAG RACE](https://i.ytimg.com/vi/5vHxPZJ-r0A/default.jpg)
![1971 Charger R/T vs 1971 Chevelle SS 454 - PURE STOCK DRAG RACE (Best of 3)](https://i.ytimg.com/vi/1Dd59l6MG0Y/default.jpg)
![Buick 455 Thunders On Dyno - Maximum Horsepower](https://i.ytimg.com/vi/AT5vdJou-vs/default.jpg)