DIY Tormek / Wen sharpening jigs, Part 3 – short tool sharpening jig for slow-speed wet grinders
This is the third of a series of videos of DIY jigs for slow-speed wet grinders like the Tormek T8, WEN BG-4270, WEN BG-9910, or versions by Harbor Freight, Grizzly, Triton, Rikon, Jet, Scheppach and others. This jig will work on any whetsone sharpening system that has a jig bar for the jig to ride against.
This jig is for small or medium sized chisels and gouges. Being able to maintain a precise angle on a tool means you'll be grinding off less metal each time you sharpen, and the tool will last longer. With this jig you can easily get consistent, repeatable bevels, which many people find hard to do when sharpening freehand with traditional oil or water stones. The jig is easy to make and can be made from scraps of hardwood and easy to find hardware.
There are .pdfs linked below for both imperial (inches) versions and metric versions, and we'll be adding links to all of the other videos in this series as they go online.
Please like, share and subscribe and click the bell if you want to be notified of new videos on the channel. If you have any questions, please comment below. Enjoy!
Small tool jig template 1 Imperial
bit.ly/36LPzZi
Small tool jig template 2 Imperial
bit.ly/3lWHNly
Small tool jig template 1 Metric
bit.ly/3kKiBxl
Small tool jig template 2 Metric
bit.ly/32Z8crz0
DIY chisel / gouge jig video:
https://www.youtube.com/watch?v=zmnEhl-oXfg&t=26s
DIY knife sharpening jig video:
https://www.youtube.com/watch?v=4kId7yTtaso
Видео DIY Tormek / Wen sharpening jigs, Part 3 – short tool sharpening jig for slow-speed wet grinders канала Normstead
This jig is for small or medium sized chisels and gouges. Being able to maintain a precise angle on a tool means you'll be grinding off less metal each time you sharpen, and the tool will last longer. With this jig you can easily get consistent, repeatable bevels, which many people find hard to do when sharpening freehand with traditional oil or water stones. The jig is easy to make and can be made from scraps of hardwood and easy to find hardware.
There are .pdfs linked below for both imperial (inches) versions and metric versions, and we'll be adding links to all of the other videos in this series as they go online.
Please like, share and subscribe and click the bell if you want to be notified of new videos on the channel. If you have any questions, please comment below. Enjoy!
Small tool jig template 1 Imperial
bit.ly/36LPzZi
Small tool jig template 2 Imperial
bit.ly/3lWHNly
Small tool jig template 1 Metric
bit.ly/3kKiBxl
Small tool jig template 2 Metric
bit.ly/32Z8crz0
DIY chisel / gouge jig video:
https://www.youtube.com/watch?v=zmnEhl-oXfg&t=26s
DIY knife sharpening jig video:
https://www.youtube.com/watch?v=4kId7yTtaso
Видео DIY Tormek / Wen sharpening jigs, Part 3 – short tool sharpening jig for slow-speed wet grinders канала Normstead
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
$0.00 DIY CoolBot repairPasture raised meat birds – Part 1CNCtable saw shapingsawmill clunking - bad bearing?mobile dimension milling alder at 37 fpmTrick felling an alder and a cedarSlabbing in Costa Rica 1Sprocket playBrowning BTC6HD940 Dark Ops 16MP – night – coyoteBrowning BTC6HD940 Dark Ops 16MP – night – snow and three coyotesChickenfest '93 part 2 of 5milling wood time lapse HDBarred owlsTrying to start the Kubota L200 at 32FWell drillingClearing brushMobile Dimension milling 3/4x10 cedar at 37 fpmHomemade cable / keyline plowBringing the boat in at Playa del Solcoyotes