Honda EGR Valve Cleaning
Here's a short DIY Video on how to clean the EGR valve on a Honda engine.
This procedure is applicable to 2.4L 4 cylinder Honda engines, found on the Civic, Accord, CR-V and Element, Acura TSX, CSX, and ILX as well as other Honda models.
The EGR valve is responsible for directing some exhaust gases back into the intake manifold to be reburned by the engine. The EGR system's purpose is to absorb some of the heat in the combustion chamber, therefore reducing the amount of harmful nitrous oxide (NOx) produced in the exhaust stream.
Because the exhaust system contains carbon, after a while the EGR valve and port can become clogged with carbon deposits. Symptoms include a laggy or unresponsive throttle, or a jerky idle or coast. It may or may not be accompanied by a P0401 Exhaust EGR Flow Insufficient engine code.
Luckily most of the time the EGR port and valve can be cleaned to restore performance. There are two 12mm nuts holding the EGR valve onto the intake manifold, and one electrical connector. To get better access, it is recommended to remove the PCV hose, vacuum line and air box tube.
Carb or throttle body cleaner and a pick can be used to clean the valve/port. This video also goes into a break down of how the EGR system works, and a physical tear down of what's inside an EGR valve.
An excellent reference video on how the EGR system works:
https://www.youtube.com/watch?v=lL_ElXQVJo8
Видео Honda EGR Valve Cleaning канала speedkar99
This procedure is applicable to 2.4L 4 cylinder Honda engines, found on the Civic, Accord, CR-V and Element, Acura TSX, CSX, and ILX as well as other Honda models.
The EGR valve is responsible for directing some exhaust gases back into the intake manifold to be reburned by the engine. The EGR system's purpose is to absorb some of the heat in the combustion chamber, therefore reducing the amount of harmful nitrous oxide (NOx) produced in the exhaust stream.
Because the exhaust system contains carbon, after a while the EGR valve and port can become clogged with carbon deposits. Symptoms include a laggy or unresponsive throttle, or a jerky idle or coast. It may or may not be accompanied by a P0401 Exhaust EGR Flow Insufficient engine code.
Luckily most of the time the EGR port and valve can be cleaned to restore performance. There are two 12mm nuts holding the EGR valve onto the intake manifold, and one electrical connector. To get better access, it is recommended to remove the PCV hose, vacuum line and air box tube.
Carb or throttle body cleaner and a pick can be used to clean the valve/port. This video also goes into a break down of how the EGR system works, and a physical tear down of what's inside an EGR valve.
An excellent reference video on how the EGR system works:
https://www.youtube.com/watch?v=lL_ElXQVJo8
Видео Honda EGR Valve Cleaning канала speedkar99
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
HOW TO CLEAN EGR VALVE IN YOUR HONDA CIVIC 2006-2010Honda Idle Air Control Valve, PCV and Throttle Body CleaningHow to Clean EGR Valve in Your Car (How It Works)P0401 Honda Accord, Cleaning EGR Passages - EricTheCarGuyThis Illegal Mod Will Make Your Car Run BetterEGR Valve, HONDA/ACURA: MDX, Pilot, Odyssey, Accord | EGR Cleaning 3.5 V6How to change your EGR Valve 98-02 AccordHow to Clean EGR Passage in V6 Engine (1998-2002 Honda Accord and Acura) P0401 codeHow To Test EGR Valves | Old vs New2005 Honda Pilot Exhaust Gas Recirculation (EGR) Valve CleaningHow To Solve Honda Idle Problems - EricTheCarGuy2 Signs of a bad EGR Valve Clogged Stuck open and closed failing symptomsCool Trick to Clean EGR Valve in Your Car (Low Flow Code P0401)How to Replace an EGR Valve 01-05 Honda CivicHonda 3.5L EGR Valve ReplacementHow to Clean EGR Valve // Honda CRV, HRV, Civic R18A1 R20A1HOW TO CLEAN OR REPLACE A EGR VALVE P0404 P0406 P2413 TUTORIALHonda Odyssey Idle Control Valve and EGR Port Cleaning (P0401)EGR valve cleaning WITHOUT DISMANTLING - Cleaner kit test Before/AfterEGR Valve Cleaning