How To Solve Honda Idle Problems - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
Before posting questions about Honda idle problems please read this: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41476-solving-honda-idle-issues-hunting-idle
The viewers have chosen and this weeks video will be about solving Honda idle problems. I'm really not surprised as I get a lot of questions and requests about this very subject. Here are the links I promised in the video that will help you address specific issues mentioned in the video.
How To Bleed a Cooling System
http://www.youtube.com/watch?v=zUpXgAJ1gjU
How to Check for Vacuum Leaks
http://www.youtube.com/watch?v=9CPqbaSgcok
Reading Check Engine Light Codes
http://www.youtube.com/watch?v=BD05sPclLyE
Diagnosing an Overheat
http://www.youtube.com/watch?v=hUzOTnsWImI
Hopefully when your done checking all that stuff out you will have solved your Honda's idle problem, if not leave a comment or send me a message and I'll see what I can do just make sure you have tried all the stuff in the videos first as that saves me from typing so much.
I also want to add my "Idle Speech" into the mix here: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41475-solving-honda-idle-issues-rough-idle
There are a lot of things that can contribute to an idle issue, in fact in the end it may still be there to some degree because of the nature of that engine however here are some things to start with.
First start with a good tune up, use NGK or Nippon Denso plugs, don't change the wires if they are OE, if they aren't OE you might consider NGK wires as they are very good and less expensive then OE. A quality cap and rotor should be good. A new air filter also helps.
Don't change the PCV valve, if you see an aftermarket PCV valve in there put a Honda in, believe it or not I've seen idle issues caused by aftermarket PCV valves, the OE's last just about forever so you can easily justify the expense.
Next a good valve adjustment, this goes a long way to smooth out the idle if done correctly, mess it up and things can get a lot worse though.
While you have the valve cover off check the timing belt tension, if you feel a lot of slack this can cause the cam to 'chunk' as it spins causing a rough idle. If you think the belt has been on there for some time then you might consider changing it and resetting the tension properly, if it's not ready for replacement you can reset the tension to take up the slack.
DO NOT adjust the idle screw under any circumstances, it is set at the factory and that is the reason it was sealed in the first place. If you find that the seal has been broken and you have a low idle and you have done all of the above then you might turn the screw out a little to see if that helps the idle but only enough to try and bring it back to where it was before it was adjusted in the first place.
Last clean the screen in the Idle Air Control valve, this can get clogged up with carbon over time and cause the flow through it to be restricted which can cause idle issues.
If you still have a 'rough' idle after all of this THEN look to the engine mounts as you want to be sure the engine is running correctly before you go for those as the one in the back is a real pain to replace.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Видео How To Solve Honda Idle Problems - EricTheCarGuy канала EricTheCarGuy
Before posting questions about Honda idle problems please read this: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41476-solving-honda-idle-issues-hunting-idle
The viewers have chosen and this weeks video will be about solving Honda idle problems. I'm really not surprised as I get a lot of questions and requests about this very subject. Here are the links I promised in the video that will help you address specific issues mentioned in the video.
How To Bleed a Cooling System
http://www.youtube.com/watch?v=zUpXgAJ1gjU
How to Check for Vacuum Leaks
http://www.youtube.com/watch?v=9CPqbaSgcok
Reading Check Engine Light Codes
http://www.youtube.com/watch?v=BD05sPclLyE
Diagnosing an Overheat
http://www.youtube.com/watch?v=hUzOTnsWImI
Hopefully when your done checking all that stuff out you will have solved your Honda's idle problem, if not leave a comment or send me a message and I'll see what I can do just make sure you have tried all the stuff in the videos first as that saves me from typing so much.
I also want to add my "Idle Speech" into the mix here: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41475-solving-honda-idle-issues-rough-idle
There are a lot of things that can contribute to an idle issue, in fact in the end it may still be there to some degree because of the nature of that engine however here are some things to start with.
First start with a good tune up, use NGK or Nippon Denso plugs, don't change the wires if they are OE, if they aren't OE you might consider NGK wires as they are very good and less expensive then OE. A quality cap and rotor should be good. A new air filter also helps.
Don't change the PCV valve, if you see an aftermarket PCV valve in there put a Honda in, believe it or not I've seen idle issues caused by aftermarket PCV valves, the OE's last just about forever so you can easily justify the expense.
Next a good valve adjustment, this goes a long way to smooth out the idle if done correctly, mess it up and things can get a lot worse though.
While you have the valve cover off check the timing belt tension, if you feel a lot of slack this can cause the cam to 'chunk' as it spins causing a rough idle. If you think the belt has been on there for some time then you might consider changing it and resetting the tension properly, if it's not ready for replacement you can reset the tension to take up the slack.
DO NOT adjust the idle screw under any circumstances, it is set at the factory and that is the reason it was sealed in the first place. If you find that the seal has been broken and you have a low idle and you have done all of the above then you might turn the screw out a little to see if that helps the idle but only enough to try and bring it back to where it was before it was adjusted in the first place.
Last clean the screen in the Idle Air Control valve, this can get clogged up with carbon over time and cause the flow through it to be restricted which can cause idle issues.
If you still have a 'rough' idle after all of this THEN look to the engine mounts as you want to be sure the engine is running correctly before you go for those as the one in the back is a real pain to replace.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Видео How To Solve Honda Idle Problems - EricTheCarGuy канала EricTheCarGuy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Honda Idle Surge Common Problems and How to Fix Diagnose Displate GiveawayHow To Bleed A Cooling System - EricTheCarGuyHonda Crv Idle Surging Fix P0507 High Idle IAC ValveHow To Find A Vacuum Leak - EricTheCarGuyHonda-Acura Surging Idle Speed (case study)How to, Honda 2.4L Idle Air Control Valve, idles Poorly #117How to fix a honda idle issue (6 common issues it could be)How to Clean or Replace a Honda IAC (Idle Air Control) Valve - Solve Poor Idle IssuesHow To Pull Honda Codes Without a Scanner -EricTheCarGuyHonda Idle Air Control Valve, PCV and Throttle Body CleaningHonda low acceleration ,rough idle ,high idle,low idle fix90 Honda accord Idle surges up and down rpm when warm part 2$600 3rd Gen Prelude Ep. 12 - How to Repair a Bouncing Idle on a HondaDiagnosing poor idle/sluggish acceleration concern. 1998 Honda CivicIdle Speed Fluctuates & Many Possible Causes (Diagnose & Fix)Honda civic high/surging idle fix (not IACV)How to Fix a Car that Idles Poorly (Rough Idle)diy honda acura idle surge fix high idle (not idle controll valve)HONDA IDLE AIR CONTROL VALVE FIX!How to Perform a Honda Idle Learn Procedure.