How to build an easy Workbench
For full project plans and write-up, visit http://jeffsdiy.com/workbench .
For this workbench build, I wanted something that would be both sturdy and simple to construct. This workbench can be built for less than $100, is a rigid design and has a shelf for extra storage. Add on a pegboard back even more space.
Tools needed
(http://amzn.to/1RV9IOz) Circular saw (or table saw)
(http://amzn.to/1J1RWc2) Miter saw (or table saw)
(http://amzn.to/1UlBtly) Bandsaw (or jig saw)
(http://amzn.to/2euU6VQ) Drill
(http://amzn.to/2ehD79Y) Impact driver (optional but helps a lot!)
(http://amzn.to/1J1RWIZ) Clamps
(http://amzn.to/1PsuL7k) Drill flip drive kit
Lumber & materials
One sheet of plywood – I used 3/4″ Maple. If you use thinner plywood, consider adding additional stretchers to support the top and bottom tabletops and add fasten them down with screws.
(2) 4×4’s – 8 foot length boards – these will be the four legs
(6) 2×4’s – 8 foot length boards – Four of the boards will be the top and bottom lengthwise supports cut to 6′ lengths. The remaining two boards will be cut into the 21″ cross supports.
3.5″ Screws (decking screws work fine)
1.5″ scews to secure the plywood, drywall screws work here
-----------------------------------------------------------------------------
Video Equipment used in making this video:
(http://amzn.to/2jKB6pG) Canon EOS 70D Video Creator Kit with 18-135mm Lens, Rode VIDEOMIC GO
------------------------------------------------------------------------
Follow Jeff's DIY on social media:
https://www.facebook.com/jeffsdiy/
https://www.pinterest.com/JeffsDIY/jeffs-diy-projects/
http://twitter.com/Jeffs_DIY
-----------------------------------------------------------------------------
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, it's possible that I will receive a small commission. This helps support the channel and allows me to continue to make videos. Thank you for the support!
-----------------------------------------------------------------------------
Music by: Jahzzar (http://goo.gl/5qrJYz) Wild ones (http://goo.gl/GHsQAr)
Видео How to build an easy Workbench канала Jeff's DIY Projects
For this workbench build, I wanted something that would be both sturdy and simple to construct. This workbench can be built for less than $100, is a rigid design and has a shelf for extra storage. Add on a pegboard back even more space.
Tools needed
(http://amzn.to/1RV9IOz) Circular saw (or table saw)
(http://amzn.to/1J1RWc2) Miter saw (or table saw)
(http://amzn.to/1UlBtly) Bandsaw (or jig saw)
(http://amzn.to/2euU6VQ) Drill
(http://amzn.to/2ehD79Y) Impact driver (optional but helps a lot!)
(http://amzn.to/1J1RWIZ) Clamps
(http://amzn.to/1PsuL7k) Drill flip drive kit
Lumber & materials
One sheet of plywood – I used 3/4″ Maple. If you use thinner plywood, consider adding additional stretchers to support the top and bottom tabletops and add fasten them down with screws.
(2) 4×4’s – 8 foot length boards – these will be the four legs
(6) 2×4’s – 8 foot length boards – Four of the boards will be the top and bottom lengthwise supports cut to 6′ lengths. The remaining two boards will be cut into the 21″ cross supports.
3.5″ Screws (decking screws work fine)
1.5″ scews to secure the plywood, drywall screws work here
-----------------------------------------------------------------------------
Video Equipment used in making this video:
(http://amzn.to/2jKB6pG) Canon EOS 70D Video Creator Kit with 18-135mm Lens, Rode VIDEOMIC GO
------------------------------------------------------------------------
Follow Jeff's DIY on social media:
https://www.facebook.com/jeffsdiy/
https://www.pinterest.com/JeffsDIY/jeffs-diy-projects/
http://twitter.com/Jeffs_DIY
-----------------------------------------------------------------------------
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, it's possible that I will receive a small commission. This helps support the channel and allows me to continue to make videos. Thank you for the support!
-----------------------------------------------------------------------------
Music by: Jahzzar (http://goo.gl/5qrJYz) Wild ones (http://goo.gl/GHsQAr)
Видео How to build an easy Workbench канала Jeff's DIY Projects
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Laminated Pine Workbench From 2x4's - WoodworkingBuilding a Workbench With Storage in Less Than One Hour - Only One Plywood Sheet and Some 2x4'sDIY Workbench | How to build a workbenchⒻ Workbench Build / Potting Bench - with Unique Joinery (ep89)How to Build a Workbench - Be Your Own Handyman @ HomeBuilding a solid and simple Workbench for under $60.00My Next Project: WorkbenchHow to Build a Workbench. Easy, Cheap & Sturdy 😁Solid workbench from 1 sheet of plywood | Cheap and Easy to Build! | #1A Simple 2x4 and plywood work table/bench You can build!!DIY BUDGET FRIENDLY WORKBENCH (FREE DOWNLOADABLE PLANS)Making a workbench frameHow to Make a Workbench Out of 2x4sBuild a Cheap Woodworking WorkbenchNew Workshop WorkbenchWorkbench with Pop Up Bench DogsHow to Build a Workbench and a Shop / Garage TourHow to Build a $100 Workbench in 4 Hours! E73HOW TO BUILD A DIY SIMPLE WORKBENCHMega Workbench - How to Make a Woodworking Bench