A New Door Seal
It's time to replace the door seals.
The process is not all that complicated. After removing the old seal, you need to remove the old adhesive. The surface needs to be clean.
Then you apply door seal adhesive to both surfaces. It's a contact cement, so you need to wait a couple minutes for it to get tacky.
Finally, you can stick the seal to the door. Be careful because as soon as the pieces touch, there's no moving it.
Видео A New Door Seal канала Mike Restores an FJ40
The process is not all that complicated. After removing the old seal, you need to remove the old adhesive. The surface needs to be clean.
Then you apply door seal adhesive to both surfaces. It's a contact cement, so you need to wait a couple minutes for it to get tacky.
Finally, you can stick the seal to the door. Be careful because as soon as the pieces touch, there's no moving it.
Видео A New Door Seal канала Mike Restores an FJ40
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Andy's FJ40, a short ride and a moose (seriously, a MOOSE)First Road Test!Two FJ40's go for a Short Trail RideMike Restores an FJ40 - ArrivalRestoring the Top - Part 3Mallory DistributorThe New-Old Front SeatsDisassembling the Top and Some SparksCompression TestLow Voltage and Some Algebra!Removing rusted boltsBeep beep... The horn works!Delivery!Brakes Part 2Floor Panel RepairCarburetor and First Start2007 Toyota RAV4 For SaleA couple words about PPEWheel RunoutBackup LightClutch