1) Sgrossatura della tavola Parte prima
Sgrossatura iniziale a sgorbia della tavola di violino, dopo aver sgrossato i bordi e tracciato lo spessore del bordo
ENGLISH TRANSLATION of the written notes in the video, in order of appearance :
00:07 - Roughing of the top plate - Part one
00:17 - Use a quite curve and wide gouge (n ° 6, width 34 mm, radius of curvature 35 mm)
00:44 - Always cut the wood fiber in the right direction to prevent uncontrolled splitting and tearing, particularly insidious with very seasoned spruce
01:04 - Arrive to expose the scribe mark along the edge, but never take it off completely
01:57 - Pay close attention to the direction of the fiber at corners and C bout, to avoid splitting the wood in an uncontrolled way in the sections against the grain
02:47 - Working in the longitudinal direction the C bout area, to avoid digging too deep compromising the amplitude of the central arch
Index of videos :
www.davidesora.altervista.org
#costruzioneviolino #violinmaking
Видео 1) Sgrossatura della tavola Parte prima канала Davide Sora
ENGLISH TRANSLATION of the written notes in the video, in order of appearance :
00:07 - Roughing of the top plate - Part one
00:17 - Use a quite curve and wide gouge (n ° 6, width 34 mm, radius of curvature 35 mm)
00:44 - Always cut the wood fiber in the right direction to prevent uncontrolled splitting and tearing, particularly insidious with very seasoned spruce
01:04 - Arrive to expose the scribe mark along the edge, but never take it off completely
01:57 - Pay close attention to the direction of the fiber at corners and C bout, to avoid splitting the wood in an uncontrolled way in the sections against the grain
02:47 - Working in the longitudinal direction the C bout area, to avoid digging too deep compromising the amplitude of the central arch
Index of videos :
www.davidesora.altervista.org
#costruzioneviolino #violinmaking
Видео 1) Sgrossatura della tavola Parte prima канала Davide Sora
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
2) Sgrossatura della tavola parte seconda Impostazione della sestaSpessori del fondo parte prima - Sgrossatura a sgorbia - Creazione dei canaliTavola di violino - Scavo del canale della sgusciahow to repair bass bar in top violin plateAmnon, il liutaio che restaura i violini della ShoahBombatura fondo - Lavorazione a pialletto (versione corta)Episode 3 Gluing the FingerboardFABIO CHIARI, liutaio: il segreto della vernice classica - Arte a modinoViolin purfling from start to finish - Filetto di violino dall'inizio alla finePiazzamento dei chiodini e tracciatura del contorno della tavolaCome #Curvare il legno con il vapore e Curvare con l'acqua Curvature NaturaliHow to Make a Violin - 3Carving a violin scroll from start to finishBombatura della tavola - AppendiceContorno dei bordi parte terza - Finitura del contorno della tavolaTavola di violino - Tracciatura, taglio e scavo del canale del filettoSpessori della tavola parte prima - Sgrossatura a sgorbiaHow to Make a Violin 15 Base BarFitting a new bass bar to a Violin front.Exploring lost violin making practices 4: the top plate