Restoration Old Rusty Adze

Hello folks! Today I want to show you my new restoration project. I found this rusty adze at flea market. I never had this tool. For the first look it's handmade by blacksmith. Sure, I bought it.

Restoration process:
I removed the old wood handle and used rust remover. Then washing in water with clinging agent and used oil for impregnation. The adze had a lot of cracks. I used angle grinder machine for crack expansion and all brewed by welding. Then I cleaned the welds and started making the cutting edge.
For the upper side I used belt grinder and for the bottom  piece of aluminum tube with similar diameter like adze. I tempered the cutting edge in warm oil, and did the release in the oven at 220 degrees for 1 hour. I used sand papers from 60 to 3000 grit.
For handle, I used dry piece of wood and lathe wood machine to made handle for adze. 
Finally, I used  my homemade wax for wood finish. As usual, I made the test for you. I hope you will enjoy this restoration video.

Please, Like and Subscribe to my channel: http://bit.ly/2FZ43bV
Patreon: http://bit.ly/39pK6ZB
Instagram: http://bit.ly/2Gbnvlt
Facebook: http://bit.ly/2LnIwxB

#screwsandtools #adze #restoration

Видео Restoration Old Rusty Adze канала Screws And Tools