Understanding PID Control, Part 5: Three Ways to Build a Model
Tuning a PID controller requires that you have a representation of the system you’re trying to control.
- Download Code Examples to Learn How to Automatically Tune PID Controller Gainshttps: http://bit.ly/2HKBh12
This could be the physical hardware or a mathematical representation of that hardware.
If you have physical hardware, you could guess at some PID gains, run a test to see how it performs, and then tweak the gains as necessary. This guess-and-check brute force tuning method might work, but you have other, more precise, options available if you have a mathematical model of the system. Therefore, this video presents three different ways to model your system so that you can take advantage of each of these methods when tuning your controller.
The first method uses a detailed understanding of the system to develop the model with first principles. The second method uses system identification, the known input, and resulting output signal to fit the data to the model structure of your choice. The third method creates a model by linearizing an existing nonlinear model around a given operating point.
With any of these models, you can start the process of developing and tuning a PID controller.
Watch more MATLAB Tech Talks: http://bit.ly/2rTc8Yp
Check out more control system lectures on Brian's Channel: http://bit.ly/2IUlvkw
Other References:
Modeling a DC Motor in Simscape: http://bit.ly/2KrgDVw
Modeling a DC Motor in Simulink and Simscape – Tutorial: http://bit.ly/2KFp8va
Videos on System Identification: http://bit.ly/2KIM3Wu
Linear Analysis Tool - Documentation: http://bit.ly/2KqEowO
Determining Model Order and Input Delay - Example: http://bit.ly/2KGsXR1
Determining an Optimal Model Order Using Akaike’s Information Criterion – Example: http://bit.ly/2KyYEMb
Get a free product Trial: https://goo.gl/ZHFb5u
Learn more about MATLAB: https://goo.gl/8QV7ZZ
Learn more about Simulink: https://goo.gl/nqnbLe
© 2018 The MathWorks, Inc. MATLAB and Simulink are registered
trademarks of The MathWorks, Inc.
See www.mathworks.com/trademarks for a list of additional trademarks. Other product or brand names maybe trademarks or registered trademarks of their respective holders.
Видео Understanding PID Control, Part 5: Three Ways to Build a Model канала MATLAB
- Download Code Examples to Learn How to Automatically Tune PID Controller Gainshttps: http://bit.ly/2HKBh12
This could be the physical hardware or a mathematical representation of that hardware.
If you have physical hardware, you could guess at some PID gains, run a test to see how it performs, and then tweak the gains as necessary. This guess-and-check brute force tuning method might work, but you have other, more precise, options available if you have a mathematical model of the system. Therefore, this video presents three different ways to model your system so that you can take advantage of each of these methods when tuning your controller.
The first method uses a detailed understanding of the system to develop the model with first principles. The second method uses system identification, the known input, and resulting output signal to fit the data to the model structure of your choice. The third method creates a model by linearizing an existing nonlinear model around a given operating point.
With any of these models, you can start the process of developing and tuning a PID controller.
Watch more MATLAB Tech Talks: http://bit.ly/2rTc8Yp
Check out more control system lectures on Brian's Channel: http://bit.ly/2IUlvkw
Other References:
Modeling a DC Motor in Simscape: http://bit.ly/2KrgDVw
Modeling a DC Motor in Simulink and Simscape – Tutorial: http://bit.ly/2KFp8va
Videos on System Identification: http://bit.ly/2KIM3Wu
Linear Analysis Tool - Documentation: http://bit.ly/2KqEowO
Determining Model Order and Input Delay - Example: http://bit.ly/2KGsXR1
Determining an Optimal Model Order Using Akaike’s Information Criterion – Example: http://bit.ly/2KyYEMb
Get a free product Trial: https://goo.gl/ZHFb5u
Learn more about MATLAB: https://goo.gl/8QV7ZZ
Learn more about Simulink: https://goo.gl/nqnbLe
© 2018 The MathWorks, Inc. MATLAB and Simulink are registered
trademarks of The MathWorks, Inc.
See www.mathworks.com/trademarks for a list of additional trademarks. Other product or brand names maybe trademarks or registered trademarks of their respective holders.
Видео Understanding PID Control, Part 5: Three Ways to Build a Model канала MATLAB
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Understanding PID Control, Part 1: What Is PID Control?Understanding PID Control, Part 6: Manual and Automatic Tuning MethodsPID Balance+Ball | full explanation & tuningTuning A Control Loop - The Knowledge BoardTrimming and Linearization, Part 1: What Is Linearization?How to Tune a PID ControllerHow To Build a Thrust Vectored Model Rocket - National Rocketry Conference 2020Why Time Delay Matters | Control Systems in Practice, Part 4How to Program a Basic PID Loop in ControlLogixState Space, Part 4: What Is LQR control?Understanding PID Control, Part 2: Expanding Beyond a Simple IntegralWhat Is Feedforward Control? | Control Systems in Practice, Part 3Designing a PID Controller Using the Ziegler-Nichols MethodUnderstanding PID Control, Part 3: Expanding Beyond a Simple DerivativePID Control - A brief introductionHow Lasers Work - A Complete GuideControlling Fuel Flow in a JetWhat Are Non-Minimum Phase Systems? | Control Systems in Practice, Part 6Simulink Basics - A Practical Look