Trash To Track - Ep 9 - Custom DIY Aluminum Door Cards (1992 NA Miata)

In this episode we build some great-looking DIY door cards for the Miata. We also re-install all of the refurbished interior components, and get the Miata driving again.

---== Interior Assembly ==---

Tools:

• Electric Impact Driver
• 3/8” Drive 10mm Deep Socket
• 3/8” Drive 12mm Deep Socket
• 3/8” Drive 14mm Deep Socket
• 3/8” Drive 5mm Allen Socket
• 1/8” Inch Drill Bit
• Flat Head Screwdriver
• Phi lips Screwdriver
• Anti-sieze

---== Door Cards ==---

Materials:

• 8’ x 4’ Sheet of 14 Gauge Aluminum
• Tri-Fold Foam Board - https://www.amazon.ca/dp/B000K39PMG/ref=cm_sw_r_oth_api_i_Fh12CbPFA9FD2

Tools:

• Metric Rivnut Tool (M6x1.00) - https://m.kmstools.com/performance-tool-45pc-threaded-insert-rivet-set-metric-169581
• Permanent Marker
• Automatic Center Punch
• Electric Impact Driver
• 3/8” Drive 5mm Allen Socket
• Cordless Drill
• Step Bit Drill Bits
• 4.5” Angle Grinder
• Pneumatic Die Grinder
• 3M Roloc Discs
• Metal File
• Olfa Knife

---== Timecodes ==---

• 0:00 - Rebuilding the interior
• 3:14 - Building the door cards
• 13:38 - Door card installation
• 18:01 - Final thoughts

---== Music ==---

• Grim (Prod. Ihaksi) - https://www.youtu.be/48DJIGeJSmU

Видео Trash To Track - Ep 9 - Custom DIY Aluminum Door Cards (1992 NA Miata) канала Pacific North Media