Making & Testing HEAVY DUTY Button Tool Holder | Shop Made Tools
We're tackling the challenge of making a heavy duty button tool holder that can handle even the most demanding lathe jobs. ️We'll take you step-by-step through the process of using our milling machine to craft the tool holder. We start by machining down all the faces using a fly cutter and indexable shell mill. We also use a roughing end mill to clean up the ends before going in with a ball nose end mill to contour the corners of the holder. We then tackle the most daunting part of the process of drilling and tapping a hole for a tiny 3.5mm screw that holds in the button insert. The next thing is to cut a radius on the front to give the insert some relief before deburring all the edges to complete the tool holder. We then put our new tool holder to the ultimate test by using it to machine the eye off a big EX1900 cylinder rod!
In this video we are using:
- Hafco BM-63VE Milling machine
- Hafco TM-26120G Centre Lathe
Check out all of our Shop Made Tools videos here:
https://www.youtube.com/playlist?list=PLUzFN5xVei7VnqB59w-gVlWGPeT7we5uF
Don't forget to:
👍Give this video a thumbs up if you enjoyed it!
🔔Subscribe & hit the notification bell so you never miss a new video.
📝Leave a comment below and let us know what you think!
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
Want Early Access & Ad Free videos?? Join our Patreon Community: https://www.patreon.com/cuttingedgeengineering
Official CEE Merch shop: https://www.ceeshop.com.au
To see more follow us on online here:
TikTok: https://vt.tiktok.com/ZSdHhtN4h/
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
#australianmachinist #machineshop #machinist
Видео Making & Testing HEAVY DUTY Button Tool Holder | Shop Made Tools канала Cutting Edge Engineering Australia
In this video we are using:
- Hafco BM-63VE Milling machine
- Hafco TM-26120G Centre Lathe
Check out all of our Shop Made Tools videos here:
https://www.youtube.com/playlist?list=PLUzFN5xVei7VnqB59w-gVlWGPeT7we5uF
Don't forget to:
👍Give this video a thumbs up if you enjoyed it!
🔔Subscribe & hit the notification bell so you never miss a new video.
📝Leave a comment below and let us know what you think!
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
Want Early Access & Ad Free videos?? Join our Patreon Community: https://www.patreon.com/cuttingedgeengineering
Official CEE Merch shop: https://www.ceeshop.com.au
To see more follow us on online here:
TikTok: https://vt.tiktok.com/ZSdHhtN4h/
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
#australianmachinist #machineshop #machinist
Видео Making & Testing HEAVY DUTY Button Tool Holder | Shop Made Tools канала Cutting Edge Engineering Australia
Показать
Комментарии отсутствуют
Информация о видео
2 февраля 2024 г. 12:00:19
00:36:50
Другие видео канала
Repairing a Cylinder Barrel for BIG D11 Bulldozer! | Machining, Welding & HoningBoom Extension Cylinder Tear Down! | Franna Crane Project | Part 12Disassembling the Boom! | Franna Crane Project | Part 11Removing & Inspecting the Boom! | Franna Crane Project | Part 10Opening & Unboxing Fan Mail! | Merry Christmas 2023 🎄New Machine Day! | Setup & Testing | RapidBlast™ SD140 Dustless BlasterMaking NEW Pins for a CAT 657 Scraper Tractor | Machining & WeldingJohn Deere Grader Repairs! | Fitting Blade Skin & Replacing Blade Slide RailOur SIP Jig Borer Tooling Collection! | Testing Shop Made BT50 Tool HolderTeardown & Inspecting The Engine! | Franna Crane Project | Part 9Removing & Inspecting The Diffs! | Franna Crane Project | Part 8This Was Like a Never Ending Puzzle! | SIP Jig Borer Upgrade | Part 1Making a BT50 Tool Holder for SIP Jig Borer Tooling! | Shop Made ToolsBrake Assembly & Engine Tests | Franna Crane Project | Part 6Making the Piston & Reassembly! | Hitachi ZX470 Cylinder Rebuild | Part 3Challenging CRACKED Cast Iron Housing Repair! | Flame Spray WeldingRepairing a BIG Mining Truck Cylinder Barrel | Part 1 | Machining & WeldingMassive Repair on BROKEN Bulldozer Blade | Part 2 | Drilling, Gouging & WeldingMaking a BIG Nut for Hydraulic Cylinder | Machining & MillingCan We SAVE This $20K Cylinder Rod!? | Gouging SEIZED Nut