Disassembling the Boom! | Franna Crane Project | Part 11

This ain’t your average tear down, we’re taking apart the 3-stage beast of a boom! This video is Part 11 in our Franna crane project and we’re getting the boom fully disassembled. We start with removing the winch cable before working on disconnecting the extension cylinder but run into our first problem, there’s not enough space to remove the cylinder from the boom 😅 So we work on getting the 21 ft’ manual extension disconnected and removed from the boom, then after tackling a few more plates in the way we successfully remove the hydraulic cylinder! Then we work on removing the next stage of the boom, but run into another problem, one of the timing cables is caught inside on the final stage of the boom 😩 after sorting that out we finish getting the first and second stages of the boom removed from the main jib. With the boom extension stages all removed the last thing left to do is remove the winch! Stay tuned for the next part of our project we’re we will be tearing down the extension cylinder!

Check out more of our Franna Crane videos here:
Part 10: Removing & Inspecting the Boom! https://youtu.be/_irBCYgdwYI
The entire Franna Crane Project playlist: https://www.youtube.com/playlist?list=PLUzFN5xVei7UatVhlxlw3576rgwg2RTXf

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

Want Early Access & Ad Free videos?? Join our Patreon Community: https://www.patreon.com/cuttingedgeengineering

Official CEE Merch shop: https://www.ceeshop.com.au

To see more follow us on online here:
TikTok: https://vt.tiktok.com/ZSdHhtN4h/
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

#australianmachinist #machineshop #machinist

Видео Disassembling the Boom! | Franna Crane Project | Part 11 канала Cutting Edge Engineering Australia