REPAIR - WE MAKAROV PMM COMMON PROBLEMS | AIRSOFT
REPAIR - WE MAKAROV PMM COMMON PROBLEMS | AIRSOFT
In this episode I will show how I amend two common problems with the WE Makarov. Barrel wobble and decocker malfunction will be addressed.
Buy your own WE Makarov here: http://airsoft.tiger111hk.com/p27904/WE-Metal-MAKAROV-GBB-Pistol-with-Silencer-(Black-,-no-marking)/product_info.html?ref=311&affiliate_banner_id=1
Share this Video: https://www.youtube.com/watch?v=qGGORqHoXtU&feature=youtu.be
STEP 1: SAFETY CHECK
0:09 I begin by removing the magazine from the gun, and check that it’s unloaded.
STEP 2: IDENTIFYING THE PROBLEM
0:22 I noticed that my barrel was a bit wibbly-wobbly, and that my safety-decocker was a bit unreliable.
STEP 3: DISMANTLING
0:37 I start by removing the slide from the frame. Next I remove the recoil spring from the barrel, and remove the barrel from the frame by pressing the trigger to let the hammer fall, and then punch out the pin holding the barrel on the frame.
STEP 4: IDENTIFYING THE CAUSE
0:43 The barrel is wibbly-wobbly due to the recoil loosening a screw.
Another screw, responsible for the decocking feature, is also loose, thus making it unreliable.
STEP 5: REMOVING SCREWS
1:02 I remove the loose screws on the frame and slide.
STEP 6: GLUING SCREWS
1:09 I add a bit of thread lock to each screw.
STEP 7: REATTACHING SCREWS
1:15 Next I attach them to their respective place, making sure to not over tighten.
STEP 8: WAITING 24 HOURS
1:24 I wait 24 hours for the thread lock to harden.
STEP 9: ASSEMBLING
1:30 I put the gun back together.
STEP 10: TESTING
1:35 After re-assembly I check that the barrel wobble is kept to a minimum . Next I I make sure that the safety-decocker works. And now for the test-fire.
Please note that I’m performing these modifications at my own risk. These mods can go very wrong if you lack the skills, tools and knowledge required, and can damage your equipment and parts as well as cause injury on your person if you attempt them yourself.
Видео REPAIR - WE MAKAROV PMM COMMON PROBLEMS | AIRSOFT канала Special Weapons And Plastic
In this episode I will show how I amend two common problems with the WE Makarov. Barrel wobble and decocker malfunction will be addressed.
Buy your own WE Makarov here: http://airsoft.tiger111hk.com/p27904/WE-Metal-MAKAROV-GBB-Pistol-with-Silencer-(Black-,-no-marking)/product_info.html?ref=311&affiliate_banner_id=1
Share this Video: https://www.youtube.com/watch?v=qGGORqHoXtU&feature=youtu.be
STEP 1: SAFETY CHECK
0:09 I begin by removing the magazine from the gun, and check that it’s unloaded.
STEP 2: IDENTIFYING THE PROBLEM
0:22 I noticed that my barrel was a bit wibbly-wobbly, and that my safety-decocker was a bit unreliable.
STEP 3: DISMANTLING
0:37 I start by removing the slide from the frame. Next I remove the recoil spring from the barrel, and remove the barrel from the frame by pressing the trigger to let the hammer fall, and then punch out the pin holding the barrel on the frame.
STEP 4: IDENTIFYING THE CAUSE
0:43 The barrel is wibbly-wobbly due to the recoil loosening a screw.
Another screw, responsible for the decocking feature, is also loose, thus making it unreliable.
STEP 5: REMOVING SCREWS
1:02 I remove the loose screws on the frame and slide.
STEP 6: GLUING SCREWS
1:09 I add a bit of thread lock to each screw.
STEP 7: REATTACHING SCREWS
1:15 Next I attach them to their respective place, making sure to not over tighten.
STEP 8: WAITING 24 HOURS
1:24 I wait 24 hours for the thread lock to harden.
STEP 9: ASSEMBLING
1:30 I put the gun back together.
STEP 10: TESTING
1:35 After re-assembly I check that the barrel wobble is kept to a minimum . Next I I make sure that the safety-decocker works. And now for the test-fire.
Please note that I’m performing these modifications at my own risk. These mods can go very wrong if you lack the skills, tools and knowledge required, and can damage your equipment and parts as well as cause injury on your person if you attempt them yourself.
Видео REPAIR - WE MAKAROV PMM COMMON PROBLEMS | AIRSOFT канала Special Weapons And Plastic
Показать
Комментарии отсутствуют
Информация о видео
22 июня 2017 г. 18:47:43
00:02:13
Другие видео канала
DISASSEMBLY - CAM870 BOLT | AIRSOFTMODIFICATION - Remington 870 Side Saddle on a CAM870 | AIRSOFT1000 SUBSCRIBERS - THANK YOU!!! | AIRSOFTREPAIR - CAM870 TRIGGER | AIRSOFTAIRSOFT GAMEPLAY - ROSERS VICE 2022, part 1UNBOXING - SUREFIRE 332R FOR SigSauer P226TIPS & TRICKS - DIY WADDING AND SEALING PAPER FOR APS CAM870 SHOTGUN SHELLS | AIRSOFTMODIFICATION - APS CAM870 MASTERKEY | AIRSOFTKIT BUILD - Nova Kimber LAPD SWAT Custom II kit | AIRSOFTDISASSEMBLY - WE M4A1 UPPER | AIRSOFTMODIFICATION - KSC/KWA GLOCK 17 FRAME | AIRSOFTUNBOXING - DOMINATOR DM870 | AIRSOFTDISASSEMBLY - APS CAM870 | AIRSOFTDISASSEMBLY - WE M4A1 LOWER | AIRSOFTMODIFICATION - PPS 870 Shell Catcher on a APS CAM870 | AIRSOFTVERSUS - VFC V1911 VS. SUREFIRE 310R | AIRSOFT/REAL STEELUNBOXING - WE M4A1 | AirsoftDISASSEMBLY - WE M4/M16/416/XM177/M733 BOLT | AIRSOFTDISASSEMBLY - WE AR TRIGGER GROUP | AIRSOFTTIPS & TRICKS - REAL FURNITURE ON WE M16A1 | AIRSOFTDISASSEMBLY - WE M16A1 LOWER | AIRSOFT