I make a Steel Knot by Bending Rebar - Clove Hitch Knot - without Heating, Metal Art Project
In this video, I make a Steel Knot by Bending Rebar, without using heat.
The knot is called a Clove Hitch Knot
This knot will be used in a future Industrial Style project. I love the look of industrial-style furniture and rebar with knots fits right in with the look I like.
I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used were a Hammer, an angle grinder and a bench vise.
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining. Thank you.
-----Product Links-----
The Brand of the Drill bits and cutting/flap discs is "Alpha" if you can't get them at your local hardware shop, here is a link to help you find your local distributor for the Alpha and Sterling products. https://www.sterlingtools.com.au
The swivel “V” magnets, Amazon: https://amzn.to/3DCya4W
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker. Amazon: https://amzn.to/3kHrXfo
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens. Amazon: https://amzn.to/2WKKpeE
-----Filming Equipment used in this video----
1)Canon EOS M6 Mark II Camera + 15-45mm Lens. Amazon: https://amzn.to/3DNnn83
2)Camera Tripod - Vanguard Alta Pro 2+ 263AB Tripod with Alta BH-100 Ball Head. Amazon: https://amzn.to/3yB8hP5
3)Camera Microphone - Rode Microphones VideoMicro Compact. Amazon: https://amzn.to/2WFmQVd
►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark
Gavin Clark
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.
Gavin Clark DIY
Видео I make a Steel Knot by Bending Rebar - Clove Hitch Knot - without Heating, Metal Art Project канала Gavin Clark
The knot is called a Clove Hitch Knot
This knot will be used in a future Industrial Style project. I love the look of industrial-style furniture and rebar with knots fits right in with the look I like.
I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used were a Hammer, an angle grinder and a bench vise.
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining. Thank you.
-----Product Links-----
The Brand of the Drill bits and cutting/flap discs is "Alpha" if you can't get them at your local hardware shop, here is a link to help you find your local distributor for the Alpha and Sterling products. https://www.sterlingtools.com.au
The swivel “V” magnets, Amazon: https://amzn.to/3DCya4W
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker. Amazon: https://amzn.to/3kHrXfo
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens. Amazon: https://amzn.to/2WKKpeE
-----Filming Equipment used in this video----
1)Canon EOS M6 Mark II Camera + 15-45mm Lens. Amazon: https://amzn.to/3DNnn83
2)Camera Tripod - Vanguard Alta Pro 2+ 263AB Tripod with Alta BH-100 Ball Head. Amazon: https://amzn.to/3yB8hP5
3)Camera Microphone - Rode Microphones VideoMicro Compact. Amazon: https://amzn.to/2WFmQVd
►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark
Gavin Clark
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.
Gavin Clark DIY
Видео I make a Steel Knot by Bending Rebar - Clove Hitch Knot - without Heating, Metal Art Project канала Gavin Clark
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ЗАВЯЗАЛ АРМАТУРУ НА УЗЕЛHYDRAULIC PRESS VS MODERN AND OLD ITEMS24 CREATIVE AND USEFUL DIY HOMEMADE IDEASConstruction Tips & Hacks That Work Extremely Well ▶3Hammer Build - IronFistTOP 10 WELDERS IDEA YOU DIDN'T KNOW || Be Creativeأداة مذهلة لن يخبرك أحد بما يمكنك فعله بهاAn ingenious idea from a piece of reinforcement !!!People And Machines Combine Skillfully At Work! You Will Enjoy Watching Them Work GreatTop 10 Incredible Billionaire ToysA brilliant idea made from scraps of rebar! THOR's hammer with your own hands!Ultimate Tensegrity Table Build- Steel & GlassThe rod twisterPOTENTE DOBLADORA MANUAL QUE NUNCA VISTE10+KG Monster Copper Cable Melt -Huge Copper Haul - ASMR Melting Metal - BigStackD Trash To TreasureMIND-BLOWING HOMEMADE PROJECTS YOU SHOULD SEEHow Many Giant Balloons Stops An Arrow?ТАКОГО ЕЩЕ НИКТО НЕ ВИДЕЛ! ГЕНИАЛЬНАЯ ИДЕЯ!I make a Twisted Steel Rebar Industrial Style Handle - MIG Welding Project.Huge Nordic Gold Bar From Scrap Metal - Gold Bar - Trash To Treasure - ASMR Metal Melting BigStackD