I make a Twisted Steel Rebar Industrial Style Handle - MIG Welding Project.
I make a Twisted Steel Rebar Industrial Style Handle. I love the look of industrial furniture and all the decor that comes with it, and this handle has the look I like. I hope you enjoy my video of the metal twist handle, it was a lot of fun to make a nice MIG welding project.
The wide flat bar is 6mm thick, 50mm wide and 225 long. The small flat bar is 6mm thick 32mm wide and 57mm long. The rebar is 7mm rebar. The distance between the two uprights is 145mm.
Main tools used, a MIG welder, angle grinder, drill, and a bench vise.
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
-----Product Links-----
-----Filming Equipment used in this video----
1.Camera - Canon EOS M6 Mirrorless Digital Camera with 15-45mm Lens, here is the link:
https://amzn.to/2WmEdti
2. Tripod- Vanguard Alta Pro 2+ 263AB 100 Aluminum Tripod with Alta BH-100 Ball Head and Multi-Angle Center Column for Sony, Nikon, Canon DSLR Cameras
https://amzn.to/3y5z8mV
3. Camera Microphone - Rode Microphones VideoMicro Compact On-Camera Microphone
https://amzn.to/3iKFcel
►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load. I love the look of industrial furniture and all the decor that comes with it, and this shelf bracket has the look I like. A nice MIG Welding Project using rebar
Gavin Clark DIY
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
Видео I make a Twisted Steel Rebar Industrial Style Handle - MIG Welding Project. канала Gavin Clark
The wide flat bar is 6mm thick, 50mm wide and 225 long. The small flat bar is 6mm thick 32mm wide and 57mm long. The rebar is 7mm rebar. The distance between the two uprights is 145mm.
Main tools used, a MIG welder, angle grinder, drill, and a bench vise.
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
-----Product Links-----
-----Filming Equipment used in this video----
1.Camera - Canon EOS M6 Mirrorless Digital Camera with 15-45mm Lens, here is the link:
https://amzn.to/2WmEdti
2. Tripod- Vanguard Alta Pro 2+ 263AB 100 Aluminum Tripod with Alta BH-100 Ball Head and Multi-Angle Center Column for Sony, Nikon, Canon DSLR Cameras
https://amzn.to/3y5z8mV
3. Camera Microphone - Rode Microphones VideoMicro Compact On-Camera Microphone
https://amzn.to/3iKFcel
►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load. I love the look of industrial furniture and all the decor that comes with it, and this shelf bracket has the look I like. A nice MIG Welding Project using rebar
Gavin Clark DIY
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
Видео I make a Twisted Steel Rebar Industrial Style Handle - MIG Welding Project. канала Gavin Clark
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
I make an Industrial Style Shelf Bracket using Rebar and Large Nail Heads as Rivets. Welding ProjectThe Rod Twister Swivel Stool // Welding Art ProjectMaking of Beautiful Swing Chair in Factory - Step by Step Full Video | Egg Hanging Swing ChairТёплый шведский фундамент. Пошаговый процесс строительства10 HOMEMADE TOOLS IDEA FOR All ARE NEEDMachining M30 Thread Cutter Holder on LatheТиски из Круглых Труб своими руками. Как сделать Тиски из круглых труб. Тиски Самодельные.Round Pipe Cutting idea // 45 Degree Angle CuttingWelding Workers Who Are Professional and Experts Of High Level ▶5How to make a steel knot by Bending Rebar - Prusik Knot - Without HEATING - Metalworking ProjectMaking a Steel Knot Metal Handle - Industrial Style Handle - MIG Welding ProjectDIY Rollbender Roller Bending Radius BenderUltimate Tensegrity Table Build- Steel & GlassIngenious Intelligent Secrets & Tips That Work Extremely Well. Valued Construction Tricks & HacksMaking Edge-Grain Patterned PlywoodMaking a Wooden Aircraft Propeller - Shaped with Basic ToolsHeavy Duty Welding Table Attachment for a Big ViseDIY MIG Welding Project - 4 Decor Ideas Metal Doorknobs and Handles An Industrial StyleHow to make a Live Edge modern bench. Dovetail joints.3 HOMEMADE TOOL IDEAS || HOME TOOLS IDEAS DIY || WELDING TOOLS DIY