Wizardry Wood Burning with a Cricut Easy Press and Ammonium Chloride

This week we did some wood burning with a vinyl stencil, a Cricut Easy Press and Ammonium Chloride .

Garrett came across this video on using ammonium chloride to brand wood and immediately ordered it from Amazon! It was a super easy technique with millions of possibilities. We used it to make these 3 cutting boards. So easy its like magic!

Mix 1tbsp ammonium chloride solution to about 1/2 cup of warm water. Stir until dissolved. Add 1 scoop of Thicken Up and let sit 3-5min. then heat it up with the easy press for about 5 mins at 350 degrees.

Stuff We Used:
Cricut Maker: https://amzn.to/2A16XKE
Vinyl: https://amzn.to/2TRw22d
Transfer Tape: https://amzn.to/2P5ic8M
Ammonium Chlorid: https://amzn.to/2PIOa07
Thicken Up: https://amzn.to/2DT7Xnb
Cricut EasyPress 2, 12x10 Inches: https://amzn.to/2PX7jba
We love to Do It Ourselves. You love to Do It Yourself. Let's Do It Together. New DIY Videos Every Week!

For more details visit: https://www.kandgmakeit.com/

Follow us on social:
- Instagram: https://www.instagram.com/kandgmakeit/
- Facebook: https://www.facebook.com/KandGmakeit/

Visit our website:
- https://www.kandgmakeit.com/
\\\\\ MUSIC \\\\\
■ ES_Leyendas (Instrumental Version) - Lu-Ni

FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!

Видео Wizardry Wood Burning with a Cricut Easy Press and Ammonium Chloride канала Kim and Garrett make it