Spline milling Cutting splines using the dividing head and finishing the transmission(part 4)
In this video I show how I make a splined shaft to connect two driving components together. Material was 8620 which I heat treat and hard turn to finish. I also heat treat the #11 Brown and Sharpe dead center I made to be able to spline this part using my Cincinnati dividing head. At the end I gave a request for anyone that may know where I can find an original tailstock for my Cincinnati 12in dividing head, if you do please email me or contact me here as I would certainly like to have one. If you managed to make it to the end of this big project thanks for sticking with me!
Видео Spline milling Cutting splines using the dividing head and finishing the transmission(part 4) канала bcbloc02
Видео Spline milling Cutting splines using the dividing head and finishing the transmission(part 4) канала bcbloc02
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Cut Axle Splines on a SAJO Indexing Head](https://i.ytimg.com/vi/vxCV4TGGKls/default.jpg)
![](https://i.ytimg.com/vi/v8LyHuaFXfA/default.jpg)
![Cutting Splines On The Shaper & Tool Grinding](https://i.ytimg.com/vi/10Y6W15fOms/default.jpg)
![machining/broaching 35 spline dana 60 drive flanges](https://i.ytimg.com/vi/Jt_EH0HOQAM/default.jpg)
![Differential Indexing Using the Dividing Head](https://i.ytimg.com/vi/8Gf64ivFByY/default.jpg)
![Milling Splines in a Hardened Steel Shaft](https://i.ytimg.com/vi/vCCmynmxplg/default.jpg)
![Billet 8620 Cam Blanks](https://i.ytimg.com/vi/1OmrlXbbcU4/default.jpg)
![Шлицевой вал 1часть](https://i.ytimg.com/vi/DNUS01ekZgk/default.jpg)
![Spline Milling a Clutch Input Shaft for a Porsche Dynamometer Single Point Boring Bar Cuts Profile](https://i.ytimg.com/vi/uK-OJ3k6Ne8/default.jpg)
![Spline cutting in the lathe](https://i.ytimg.com/vi/xPZ7hzLdgyU/default.jpg)
![CUT PTO SPLINES IN 18 EASY STEPS!](https://i.ytimg.com/vi/gDQLIEV3IpA/default.jpg)
![Cutting axle splines made easy , set up and how to part 1](https://i.ytimg.com/vi/p_mSIY44pAA/default.jpg)
![Keyway Clocking In The Slot](https://i.ytimg.com/vi/mwd94E26cdw/default.jpg)
![Spline making with Involute Gear Cutters](https://i.ytimg.com/vi/pRWVUF6ptCU/default.jpg)
![Cutting Splines](https://i.ytimg.com/vi/qTOSgI2bgxk/default.jpg)
![Differential Indexing Using a Dividing Head](https://i.ytimg.com/vi/tQBhHjNO69s/default.jpg)
![Replacing the Spindle Bearings on a Bridgeport R8 Spindle](https://i.ytimg.com/vi/UPJhq9POdAA/default.jpg)
![027 DIVIDING HEAD & GEAR CUTTING, MILLING 101 MARC LECUYER](https://i.ytimg.com/vi/U7h-DTtj-pw/default.jpg)
![Cutting a Keyway or Spline in the lathe with a Powered Slotter](https://i.ytimg.com/vi/9H7IgbdcGHE/default.jpg)
![MACHINE SHOP TIPS #155 Pt 3 Bolt Circles-Dividing Head Method tubalcain](https://i.ytimg.com/vi/AUMFXPqCJVs/default.jpg)