Optional but useful things to include in prototype PCBs for testing and debugging // KiCad

#pcb #prototype #kicad
There are some useful optional things we can include in our PCBs to make debugging and testing easier. In this videos, I share about 6 optional things that I wish I had included so that I did not waste time searching or testing various configurations. I share how we can incorporate these items with KiCad in any PCBs.

‣ Some links below are affiliate. I receive a small commission at no extra cost to you.

⏰ TIMESTAMPS AND RESOURCES
0:00 Intro
1:01 Modularity with logical blocks
2:00 Options with DNP, solder jumpers, 0Ω resistors
5:24 Debugging with test points, multimeter, and pogo pins
6:45 Helpers with silkscreen notes, power, polarity, project, writable area
8:25 Mounting holes with standards and sizes
9:58 LEDs for power, indication, TX/RX, power consumption
11:24 My Twitter question & Thanks to open source projects

🛍️ PRODUCTS MENTIONED
Single row pin headers 2.54mm
https://s.click.aliexpress.com/e/_AZtMoD
https://amzn.to/3rszW34

Pin header jumper blocks 2.54mm
https://s.click.aliexpress.com/e/_A5tVit
https://amzn.to/3rppEk6

Spring test probe pogo pins
https://s.click.aliexpress.com/e/_ATbaTB
https://amzn.to/3rr3PQZ

Screw set
https://s.click.aliexpress.com/e/_ArQ3s5
https://amzn.to/3xUvsUZ

🎩 DEMO FILES
Oak PCB https://hutscape.com/oak/hardware

📺 WATCH NEXT
What's in a hardware prototype for version 1.0? https://youtu.be/TuAxtWDT01s
Design considerations for transferring a breadboard prototype to custom PCB // Arduino, mcu, sensors https://youtu.be/LZrSC_AGrMM
Common missing steps between the schematic and PCB layout // KiCad, PartsBox with LoRa, E-Ink, GPS https://youtu.be/SxpuTqal_V0

🔗 LINKS SHOWN
Thumbnail photo by Photo Brian Wangenheim on Unsplash https://unsplash.com/photos/k_YLyRBmgo4
Anna's story, GitHub on YouTube https://www.youtube.com/watch?v=VzuBJTtwm3o&t=36s
Young engineers by Alena Darmel on Pexels https://www.pexels.com/video/young-engineers-developing-robots-7729820/
Adafruit Si7021 Breakout Board https://www.adafruit.com/product/3251
Schematic https://cdn-learn.adafruit.com/assets/assets/000/094/452/original/temperature___humidity_Si7021_sch.png?1598559664
Adafruit VEML7700 Lux Sensor https://www.adafruit.com/product/4162
Schematic https://cdn-learn.adafruit.com/assets/assets/000/073/775/original/adafruit_products_Adafruit_VEML7700_Sch.png?1553798308
How to Use Do-not-populate (DNP) Components in Your PCB Design https://maker.pro/pcb/tutorial/how-to-use-do-not-populate-dnp-components-in-your-pcb-design
Arduino Nano 33 BLE https://store.arduino.cc/usa/nano-33-ble
Teensy 4.0 board https://www.pjrc.com/store/teensy40.html
Solder Bridge Jumper Best Practices in PCB Design https://resources.altium.com/p/solder-bridge-jumper-best-practices-pcb-design
YwRobot Breadboard Power Supply https://static.rapidonline.com/pdf/73-4538_v1.pdf
5 uses of 0Ω resistor you should know https://www.seeedstudio.com/blog/2020/05/27/5-uses-of-0ω-resistor-you-should-know/
Raspberry PI Pico board datasheet https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
What are these round pads on the bottom of a PCB? https://electronics.stackexchange.com/questions/437423/what-are-these-round-pads-on-the-bottom-of-a-pcb
iCEBreaker FPGA https://1bitsquared.com/products/icebreaker
From Idea To Production: Using KiCad For OSHW Design And Mfg by Piotr Esden-Tempski (KiCon 2019) https://www.youtube.com/watch?v=UL58tBZbCsQ&t=737s
esden/pretty-kicad-libs GitHub https://github.com/esden/pretty-kicad-libs
Writable area on a PCB https://electronics.stackexchange.com/questions/422510/writable-area-on-a-pcb
Particle.io Boron datasheet https://docs.particle.io/datasheets/boron/boron-datasheet/
Adafruit Feather specification https://learn.adafruit.com/adafruit-feather?view=all
RobotDyn M0 mini https://robotdyn.com/samd21-m0-mini.html
Schematic https://robotdyn.com/pub/media/0G-00005516==SAMD21-MINI/DOCS/Schematic==0G-00005516==SAMD21-MINI.pdf
Twitter question https://twitter.com/sayanee_/status/1401471208403603463

🔌 TOOLS USED
https://hutscape.com/tools

🎶 MUSIC
Spring Field by Godmode from YouTube Audio library

Видео Optional but useful things to include in prototype PCBs for testing and debugging // KiCad канала Sayanee Basu