Familiarization tour of the Cozy Mk. IV, and UL520iS engine runs
In this video, I push the fuselage of the Cozy Mk. IV out of the garage, and demonstrate how to get into the plane and get it ready for a run of the UL Power UL520iS engine.
At 2:30 I misspoke. Of course it's an oil line delivering oil to the valve areas, not a gas line.
At about 14 minutes, I run the engine up to 1500 rpm and test the electronic ignition systems by momentarily shut off first the left, and then the right ignition system, looking for an rpm drop (there wasn't any) - watch the hand signals, before going to full throttle.
At the end of the video, I try taxiing and differential braking to make sure I can steer the plane with its castering nose wheel. This is the first time it has moved under it's own power!
Fun!
Видео Familiarization tour of the Cozy Mk. IV, and UL520iS engine runs канала Gregory A. Cross
At 2:30 I misspoke. Of course it's an oil line delivering oil to the valve areas, not a gas line.
At about 14 minutes, I run the engine up to 1500 rpm and test the electronic ignition systems by momentarily shut off first the left, and then the right ignition system, looking for an rpm drop (there wasn't any) - watch the hand signals, before going to full throttle.
At the end of the video, I try taxiing and differential braking to make sure I can steer the plane with its castering nose wheel. This is the first time it has moved under it's own power!
Fun!
Видео Familiarization tour of the Cozy Mk. IV, and UL520iS engine runs канала Gregory A. Cross
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pulling the roving thread out of the spar cap tape - 6/20/143rd. Break-in Run 8/3/2019 - Out of gas! displayed on HDX-1100UL Power UL520iS full throttle break-in run in a Cozy Mk. IVWig Wag 3-15-2019UL520iS Break-in run - 6/12/2019 on Dynon HDX-1100 displayLookie - It works! - 3/20/14Ad-hoc engine runup - 10/13/202nd. Break in Run 8/3/2019 - UL Power UL520iS Hot StartLets go flyingImproving the Side-opening Canopy LatchCozy Mk. IV in the Workshop - Episode 2Remembering JeanieUL520iS Break-In Runs 12-11-2020UL520iS Hot Start - 6/12/2019Cozy Mk. IV LED Interior lightingNew Dynon EMS-220 Indicator "Lights"UL520iS Break-in run - 6/12/2019The REAL first start of the ULPower UL520iS engine in a Cozy Mk. IV build.Finishing preparation - or "The 1000 hours" of sanding!Wetting out the spar cap tape - 6/20/141st. Break-in Run 8/3/2019 with new Culver prop