Wig Wag 3-15-2019
I had decided to put two bright LED landing lights mid-wing on either side of the Cozy, so why not make them flash to get the attention of any oncoming planes, especially while on approach to landing? I used an inexpensive emergency vehicle flasher and chose alternate flashing from a menu of six flash styles. It's easily changed, if I want a different pattern.
Видео Wig Wag 3-15-2019 канала Gregory A. Cross
Видео Wig Wag 3-15-2019 канала Gregory A. Cross
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Pulling the roving thread out of the spar cap tape - 6/20/14](https://i.ytimg.com/vi/Uyhmfua3rrY/default.jpg)
![3rd. Break-in Run 8/3/2019 - Out of gas! displayed on HDX-1100](https://i.ytimg.com/vi/6SSlB2VpF4s/default.jpg)
![UL Power UL520iS full throttle break-in run in a Cozy Mk. IV](https://i.ytimg.com/vi/CVbka_sjT0A/default.jpg)
![UL520iS Break-in run - 6/12/2019 on Dynon HDX-1100 display](https://i.ytimg.com/vi/NZNrfl-42fU/default.jpg)
![Lookie - It works! - 3/20/14](https://i.ytimg.com/vi/ElvdO-JgxQ4/default.jpg)
![Ad-hoc engine runup - 10/13/20](https://i.ytimg.com/vi/xpjLl5JwydI/default.jpg)
![2nd. Break in Run 8/3/2019 - UL Power UL520iS Hot Start](https://i.ytimg.com/vi/-Lfoa8udU8o/default.jpg)
![Lets go flying](https://i.ytimg.com/vi/Oabn4AmZbc0/default.jpg)
![Improving the Side-opening Canopy Latch](https://i.ytimg.com/vi/IXalbQ3QSjQ/default.jpg)
![Cozy Mk. IV in the Workshop - Episode 2](https://i.ytimg.com/vi/h-5VT00r-Kk/default.jpg)
![Remembering Jeanie](https://i.ytimg.com/vi/g7TYfvToiec/default.jpg)
![UL520iS Break-In Runs 12-11-2020](https://i.ytimg.com/vi/XPGYgmLehOA/default.jpg)
![UL520iS Hot Start - 6/12/2019](https://i.ytimg.com/vi/S2qdseR_dzM/default.jpg)
![Cozy Mk. IV LED Interior lighting](https://i.ytimg.com/vi/86ZIgAnG9pY/default.jpg)
![New Dynon EMS-220 Indicator "Lights"](https://i.ytimg.com/vi/_TXvArE-ihs/default.jpg)
![UL520iS Break-in run - 6/12/2019](https://i.ytimg.com/vi/FKPU_YhJo54/default.jpg)
![The REAL first start of the ULPower UL520iS engine in a Cozy Mk. IV build.](https://i.ytimg.com/vi/yVpdygee8Eo/default.jpg)
![Finishing preparation - or "The 1000 hours" of sanding!](https://i.ytimg.com/vi/Ia0FGrZ8wBE/default.jpg)
![Wetting out the spar cap tape - 6/20/14](https://i.ytimg.com/vi/a1LUUfkYCr8/default.jpg)
![1st. Break-in Run 8/3/2019 with new Culver prop](https://i.ytimg.com/vi/xX6PZ19bLBA/default.jpg)