Making a set of Riser Feet for the Landis Grinder
A small improvement for my Landis surface grinder - a set of riser feet to lift the machine up higher off the floor to make it more comfortable to operate as well as allowing me to get under the machine with a pallet jack to move around the shop. This is the process of making those feet, including some lathe work and TIG welding.
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Making a set of Riser Feet for the Landis Grinder канала Keith Rucker - VintageMachinery.org
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Making a set of Riser Feet for the Landis Grinder канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
28 мая 2018 г. 16:29:00
00:12:00
Другие видео канала
![Moving and Leveling the Landis Surface Grinder](https://i.ytimg.com/vi/xrEkpojPztg/default.jpg)
![Pouring Babbitt Bearings for a Goldens’ Three Roller Cane Mill](https://i.ytimg.com/vi/FxkDXg-6HJg/default.jpg)
![Metal Planer Restoration 39: Making a Bevel Gear Blank on the Metal Lathe](https://i.ytimg.com/vi/LuZ6FOKvim8/default.jpg)
![SNS 220: Shaping 28" Parallel Bars](https://i.ytimg.com/vi/3N20fttRgKM/default.jpg)
![How To Stop A Bench Grinder From Vibrating Using Static Balancing](https://i.ytimg.com/vi/6TA5vf510Vo/default.jpg)
![Machining a Greenlee Shaper Spindle: Part 1 - Making a Mounting Arbor](https://i.ytimg.com/vi/r3b6d7o4IAk/default.jpg)
![More Easy Improvements For Your Lathe and Mill](https://i.ytimg.com/vi/mePAN7KhdxY/default.jpg)
![Odds & Ends 115: Steam Stoker Collaboration, Column Square, Welding Cart & Compressor Shed](https://i.ytimg.com/vi/cTW3_IB9zSU/default.jpg)
![Metal Planer Restoration 50: Machining new Hardware for the Clapper Box Assembly](https://i.ytimg.com/vi/09AWA3eHBoQ/default.jpg)
![Turning a Custom Shaft on the Metal Lathe - Drill Press Gear Repair](https://i.ytimg.com/vi/VTup40d8I0A/default.jpg)
![How to leveling a Lathe](https://i.ytimg.com/vi/FER3aNLtcPs/default.jpg)
![Keith Rucker - My Shop and How I Got Started](https://i.ytimg.com/vi/sOzclNqEIZA/default.jpg)
![Power Scraping a Camel Back Straight Edge using a Biax Power Scraper](https://i.ytimg.com/vi/mxL1qkVWpZ0/default.jpg)
![How to Dress and Balance a Surface Grinder Wheel](https://i.ytimg.com/vi/MofRhM_W-Vk/default.jpg)
![Leveling Screw Feet Modifications](https://i.ytimg.com/vi/-fos0eFPHrM/default.jpg)
![Machinist Tool Boxes: A Tour of Boxes Saved from the Scrapper](https://i.ytimg.com/vi/Bx2QfbN5rfM/default.jpg)
![Lathe Tail Stock Adjustment](https://i.ytimg.com/vi/z5c_7eMRiYs/default.jpg)
![Landis Surface Grinder - Reinstalling the Gear Box](https://i.ytimg.com/vi/-tM9kY-E8h8/default.jpg)
![Planer Restoration 62: Machining a Flat Belt Lubricator Pulley](https://i.ytimg.com/vi/_fh0qqNzC20/default.jpg)
![DRO BASICS? & Lathe Tool Offsets!! (SINO DRO)](https://i.ytimg.com/vi/nTG1TTR1CJk/default.jpg)